dt-alerting

dt-alerting

Configure and understand the full alerting lifecycle in Dynatrace — from anomaly detector setup through Grail event storage, problem grouping, and workflow notification delivery.

The Alerting Lifecycle

┌─────────────────────────────────────────────────────────────────────┐
│  Alert Sources — five categories, each fires a DAVIS_EVENT          │
│  ─────────────────────────────────────────────────────────────────  │
│  1. DQL-based  · Grail-scheduled server-side detector               │
│  2. Edge       · OneAgent on monitored host or process              │
│  3. Pipeline   · OpenPipeline ingest-stream filter matcher          │
│  4. Synthetic  · Worldwide synthetic checker node                   │
│  5. External   · Events API, Workflow, or OneAgent local ingest     │
└──────────────────────────────┬──────────────────────────────────────┘
                               │ DAVIS_EVENT created per trigger per entity
                               ▼
             ┌─────────────────────────────────────┐
             │  Event stored in Grail              │  Persisted and queryable via DQL.
             └──────────────────┬──────────────────┘  One event per trigger per entity.
                                │ correlated by root-cause and impact graph
                                ▼
             ┌─────────────────────────────────────┐
             │  Problem (Denoising)                │  Events sharing the same root-cause
             └──────────────────┬──────────────────┘  and impact graph → one Problem.
                                │ problem event triggers workflow
                                ▼
             ┌─────────────────────────────────────┐
             │  Workflow Notification              │  Filters problems and routes to
             └─────────────────────────────────────┘  email, Slack, ServiceNow, webhook.

When to Use This Skill

• Detector setup — "How do I create an anomaly detector?", "What kind of

detector should I use?", "What is the difference between adaptive and seasonal?"

• Alert event history — "Query all alert events for this service", "Show me

which metrics triggered alerts last week"

• Problem denoising — "Why did these two alerts merge into one problem?",

"How does Davis group alerts?"

• Notification setup — "How do I send a Slack message when a problem opens?",

"Set up a ServiceNow ticket on critical problems"

• Best practices — "How do I avoid alert storms?", "Which sensitivity setting

should I use?"

• Over-alerting analysis — "Why am I getting too many alerts?", "How do I

reduce alert fatigue?", "Which detector is firing the most?", "How do I tune sensitivity or thresholds to avoid noise?"

• Notification routing — "How do I route alerts to the right team?", "Set up

scalable problem filters in workflows", "Send Slack notifications only to the team responsible for the affected service"

Agent Instructions

First step for any alerting setup request — Before recommending a specific detector or model, load references/anomaly-detectors.md and use its category and model decision guide to identify which detector category (DQL-based, Edge, Pipeline, Synthetic, External) and which model (Static, Adaptive, Seasonal) best fits the user's use-case. Only proceed with configuration guidance once the right detector type has been established.

Consolidate, don't multiply — When a user asks to alert on multiple entities of the same kind (e.g. "alert on services A, B, and C"), always recommend a single combined detector rather than one detector per entity. Use by: { <dimension> } in the DQL timeseries call to split results per entity, and a single filter: clause to scope to the relevant entities. Pair the combined detector with a single `dt.alert_group` tag shared across all alert conditions and the corresponding workflow notification filter. This keeps the number of detector configs small, ensures consistent routing, and makes the workflow notification channel reusable for future entities added to the same group.

Example for three services — one detector, one workflow:

timeseries avg(dt.service.request.response_time),
  by: { dt.smartscape.service },
  filter: { in(dt.smartscape.service, {toSmartscapeId("SERVICE-0000000000000001"), toSmartscapeId("SERVICE-0000000000000002"), toSmartscapeId("SERVICE-0000000000000003")}) }

Set dt.alert_group: "checkout-team" in the detector's event properties, then filter the notification workflow on matchesPhrase(dt.alert_group, "checkout-team"). If a new service must be covered, add it to the single filter: list — no new detector or workflow rule needed.

Intent Mapping

Analyzing existing problems — If the user wants to query or investigate active/closed problems (root cause, impact, trending), load dt-obs-problems instead. This skill covers configuration and flow, not problem query analytics.

Detector health monitoring — If the user asks whether detectors are running or failing, load dt-platform (ANALYZEREXECUTIONEVENT, ANOMALYDETECTORSTATUS_EVENT). This skill covers setup, not operational health.

Prerequisites

• Access to a Dynatrace environment with Settings v2 write permissions for

detector configuration

• For querying alert history: DQL permissions on dt.davis.events
• Load dt-dql-essentials before writing DQL queries

Knowledge Base Structure

Key Concepts

Alert Source Categories

Five fundamental categories of anomaly detectors, distinguished by where detection runs and how the alert event reaches Dynatrace:

See references/anomaly-detectors.md for the full breakdown of each category, including trade-offs and configuration entry points.

Detector Models at a Glance

Davis Events vs. Problems

A single problem typically contains multiple events. Querying problems gives the operational view; querying events gives the raw alert history.

Problem Denoising

For questions about why alerts merged into a problem or how Davis groups events, load dt-obs-problems — the merge logic and rules are documented in dt-obs-problems/references/problem-merging.md. This skill covers alert configuration and flow only.

Quick Start

Check What Alerts Fired in the Last 24 Hours

fetch dt.davis.events, from: -24h
| filter event.status == "ACTIVE"
| summarize alert_count = count(), by: {event.name, event.category, dt.smartscape_source.id}
| sort alert_count desc
| limit 20

Check Alert Volume by Category

fetch dt.davis.events, from: -24h
| summarize count = count(), by: {event.category, event.status}
| sort count desc

See All Active Problems (→ load dt-obs-problems for full query patterns)

fetch dt.davis.problems, from: -24h
| filter not(dt.davis.is_duplicate) and event.status == "ACTIVE"
| fields event.start, display_id, event.name, event.category
| sort event.start desc
| limit 20

Best Practices

1. Match the model to the metric's behavior — Use static for hard SLO

boundaries, adaptive for metrics without a natural fixed limit, seasonal for anything that follows business hours or weekly patterns.

1. Scope detectors narrowly — An entity selector that covers only relevant

entities reduces noise and makes problems more actionable.

1. Tune sensitivity before going to production — Start with LOW sensitivity

and move to MEDIUM or HIGH only after observing false-positive rates.

1. Let Davis denoise before notifying — Trigger workflow notifications on

problems, not individual alert events. A problem groups correlated alerts so you notify once per incident, not once per metric.

1. Filter notifications by severity level — Route event.severity <= 2 problems to

on-call channels immediately; route event.severity >= 3 problems to lower- urgency channels. Either set severity in the detector config or assign in a pipeline rule or workflow.

1. Use `dt.alert_group` event property for routing — Assign dt.alert_group to route alerts to the right team. Either set a static value in the detector config, use dynamic assignment through DQL query result mapping or assign in a pipeline rule.
2. Combine same-condition alerts into one detector and one workflow — When

alerting on multiple entities with the same metric and threshold, merge them into a single DQL-based detector using by: { <dimension> } and a combined filter: clause. Assign the same dt.alert_group value to every condition in that detector and point the workflow notification channel at that single group. One detector + one workflow per logical alert group scales better than N detectors + N notification rules, and adding a new entity is a one-line filter change rather than a full detector/workflow addition.

Related Skills

• dt-obs-problems — Querying, analyzing, and trending detected problems
• dt-obs-predictive-analytics — Ad-hoc anomaly and novelty detection using

MCP analyzer tools (not persistent alert configs)

• dt-platform — Operational health of anomaly detectors (execution events,

failure rates)

• dt-platform-costs — Query costs generated by anomaly detector DQL
• dt-sdlc-quality-gates — Site Reliability Guardian for deployment gate alerting
• dt-dql-essentials — DQL syntax for writing detector queries and alert history

queries