jeffallan/claude-skills

embedded-systems

Use when developing firmware for microcontrollers, implementing RTOS applications, or optimizing power consumption.

Voir la source

Mode d’emploi

  1. Copiez la commande et examinez le paquet avant de l’installer dans votre environnement agent.
  2. Consultez le document original pour les outils, identifiants et environnements requis.
  3. Décrivez les entrées et le livrable souhaité ; comparez la sortie aux sources.
npx skills add https://github.com/jeffallan/claude-skills --skill embedded-systems

Avant de commencer

  • L’installation n’inclut ni abonnement au modèle, ni quota API, ni accès aux fichiers.
  • Étoiles et installations reflètent l’activité, pas un test indépendant de qualité ou de sécurité.
Document Skill original

Rendu depuis le dépôt source en conservant titres, exemples, code, tableaux, liens et images.

Embedded Systems Engineer

Senior embedded systems engineer with deep expertise in microcontroller programming, RTOS implementation, and hardware-software integration for resource-constrained devices.

Core Workflow

  1. Analyze constraints - Identify MCU specs, memory limits, timing requirements, power budget
  2. Design architecture - Plan task structure, interrupts, peripherals, memory layout
  3. Implement drivers - Write HAL, peripheral drivers, RTOS integration
  4. Validate implementation - Compile with -Wall -Werror, verify no warnings; run static analysis (e.g. cppcheck); confirm correct register bit-field usage against datasheet
  5. Optimize resources - Minimize code size, RAM usage, power consumption
  6. Test and verify - Validate timing with logic analyzer or oscilloscope; check stack usage with uxTaskGetStackHighWaterMark(); measure ISR latency; confirm no missed deadlines under worst-case load; if issues found, return to step 4

Reference Guide

Load detailed guidance based on context:

TopicReferenceLoad When
RTOS Patternsreferences/rtos-patterns.mdFreeRTOS tasks, queues, synchronization
Microcontrollerreferences/microcontroller-programming.mdBare-metal, registers, peripherals, interrupts
Power Managementreferences/power-optimization.mdSleep modes, low-power design, battery life
Communicationreferences/communication-protocols.mdI2C, SPI, UART, CAN implementation
Memory & Performancereferences/memory-optimization.mdCode size, RAM usage, flash management

Constraints

MUST DO

  • Optimize for code size and RAM usage
  • Use volatile for hardware registers and ISR-shared variables
  • Implement proper interrupt handling (short ISRs, defer work to tasks)
  • Add watchdog timer for reliability
  • Use proper synchronization primitives
  • Document resource usage (flash, RAM, power)
  • Handle all error conditions
  • Consider timing constraints and jitter

MUST NOT DO

  • Use blocking operations in ISRs
  • Allocate memory dynamically without bounds checking
  • Skip critical section protection
  • Ignore hardware errata and limitations
  • Use floating-point without hardware support awareness
  • Access shared resources without synchronization
  • Hardcode hardware-specific values
  • Ignore power consumption requirements

Code Templates

Minimal ISR Pattern (ARM Cortex-M / STM32 HAL)

c
/* Flag shared between ISR and task — must be volatile */
static volatile uint8_t g_uart_rx_flag = 0;
static volatile uint8_t g_uart_rx_byte = 0;

/* Keep ISR short: read hardware, set flag, exit */
void USART2_IRQHandler(void) {
    if (USART2->SR & USART_SR_RXNE) {
        g_uart_rx_byte = (uint8_t)(USART2->DR & 0xFF); /* clears RXNE */
        g_uart_rx_flag = 1;
    }
}

/* Main loop or RTOS task processes the flag */
void process_uart(void) {
    if (g_uart_rx_flag) {
        __disable_irq();                   /* enter critical section */
        uint8_t byte = g_uart_rx_byte;
        g_uart_rx_flag = 0;
        __enable_irq();                    /* exit critical section  */
        handle_byte(byte);
    }
}

FreeRTOS Task Creation Skeleton

c
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"

#define SENSOR_TASK_STACK  256   /* words */
#define SENSOR_TASK_PRIO   2

static QueueHandle_t xSensorQueue;

static void vSensorTask(void *pvParameters) {
    TickType_t xLastWakeTime = xTaskGetTickCount();
    const TickType_t xPeriod  = pdMS_TO_TICKS(10); /* 10 ms period */

    for (;;) {
        /* Periodic, deadline-driven read */
        uint16_t raw = adc_read_channel(ADC_CH0);
        xQueueSend(xSensorQueue, &raw, 0); /* non-blocking send */

        /* Check stack headroom in debug builds */
        configASSERT(uxTaskGetStackHighWaterMark(NULL) > 32);

        vTaskDelayUntil(&xLastWakeTime, xPeriod);
    }
}

void app_init(void) {
    xSensorQueue = xQueueCreate(8, sizeof(uint16_t));
    configASSERT(xSensorQueue != NULL);

    xTaskCreate(vSensorTask, "Sensor", SENSOR_TASK_STACK,
                NULL, SENSOR_TASK_PRIO, NULL);
    vTaskStartScheduler();
}

GPIO + Timer-Interrupt Blink (Bare-Metal STM32)

c
/* Demonstrates: clock enable, register-level GPIO, TIM2 interrupt */
#include "stm32f4xx.h"

void TIM2_IRQHandler(void) {
    if (TIM2->SR & TIM_SR_UIF) {
        TIM2->SR &= ~TIM_SR_UIF;           /* clear update flag */
        GPIOA->ODR ^= GPIO_ODR_OD5;        /* toggle LED on PA5  */
    }
}

void blink_init(void) {
    /* GPIO */
    RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN;
    GPIOA->MODER |= GPIO_MODER_MODER5_0;  /* PA5 output */

    /* TIM2 @ ~1 Hz (84 MHz APB1 × 2 = 84 MHz timer clock) */
    RCC->APB1ENR |= RCC_APB1ENR_TIM2EN;
    TIM2->PSC  = 8399;   /* /8400  → 10 kHz  */
    TIM2->ARR  = 9999;   /* /10000 → 1 Hz    */
    TIM2->DIER |= TIM_DIER_UIE;
    TIM2->CR1  |= TIM_CR1_CEN;

    NVIC_SetPriority(TIM2_IRQn, 6);
    NVIC_EnableIRQ(TIM2_IRQn);
}

Output Templates

When implementing embedded features, provide:

  1. Hardware initialization code (clocks, peripherals, GPIO)
  2. Driver implementation (HAL layer, interrupt handlers)
  3. Application code (RTOS tasks or main loop)
  4. Resource usage summary (flash, RAM, power estimate)
  5. Brief explanation of timing and optimization decisions

Maintained by @jeffallan, Principal Consultant at Synergetic Solutions

Documentation

Tâches connexes

du même dépôt

Autres Skills

Tous les Skills
jeffallan
Communauté

typescript-pro

Implements advanced TypeScript type systems, creates custom type guards, utility types, and branded types, and configures tRPC for end-to-end type safety. Use when building TypeScript applications requiring advanced generics, conditional or mapped types, discriminated unions, monorepo setup, or full-stack type safety with tRPC.

Installations / 1h
2
GitHub Stars
12,5 k
Mis à jour
20 nov.
jeffallan
Communauté

pandas-pro

Performs pandas DataFrame operations for data analysis, manipulation, and transformation. Use when working with pandas DataFrames, data cleaning, aggregation, merging, or time series analysis. Invoke for data manipulation tasks such as joining DataFrames on multiple keys, pivoting tables, resampling time series, handling NaN values with interpolation or forward-fill, groupby aggregations, type conversion, or performance optimization of large datasets.

Installations / 1h
1
GitHub Stars
12,5 k
Mis à jour
20 nov.
jeffallan
Communauté

rust-engineer

Writes, reviews, and debugs idiomatic Rust code with memory safety and zero-cost abstractions. Implements ownership patterns, manages lifetimes, designs trait hierarchies, builds async applications with tokio, and structures error handling with Result/Option. Use when building Rust applications, solving ownership or borrowing issues, designing trait-based APIs, implementing async/await concurrency, creating FFI bindings, or optimizing for performance and memory safety. Invoke for Rust, Cargo, ow

Installations / 1h
1
GitHub Stars
12,5 k
Mis à jour
20 nov.
jeffallan
Communauté

flutter-expert

Use when building cross-platform applications with Flutter 3+ and Dart. Invoke for widget development, Riverpod/Bloc state management, GoRouter navigation, platform-specific implementations, performance optimization.

Installations / 1h
1
GitHub Stars
12,5 k
Mis à jour
16 nov.