cmux-keyboard-shortcuts

원본 Skill 문서

원본 저장소의 제목, 예시, 코드, 표, 링크, 이미지를 유지해 표시합니다.

Turn a user's workflow preferences into cmux shortcut bindings in ~/.config/cmux/cmux.json: guide, propose compact templates, apply the selected changes, and confirm the config parses with recognized keys.

Contributor rule: adding a new shortcut

Every new cmux-owned keyboard shortcut must be added to Sources/KeyboardShortcutSettings.swift, visible and editable in Settings > Keyboard Shortcuts, supported as shortcuts.bindings.<actionId> in ~/.config/cmux/cmux.json, and documented in web/app/[locale]/(landing)/docs/keyboard-shortcuts/page.tsx and the configuration docs. All four, not a subset.

Prerequisites

Work from a cmux checkout or worktree root when possible.
Use skills/cmux-settings/scripts/cmux-settings for every read/write. It reads JSONC, writes atomically, and validates JSON plus recognized settings keys.
Action IDs: skills/cmux-settings/references/shortcut-actions.md. Current defaults: web/data/cmux-shortcuts.ts or Sources/KeyboardShortcutSettings.swift.

bash

if [[ -z "${CMUX_SETTINGS:-}" ]]; then
  root="$(git rev-parse --show-toplevel 2>/dev/null || pwd)"
  for candidate in \
    "$root/skills/cmux-settings/scripts/cmux-settings" \
    "${CODEX_HOME:-$HOME/.codex}/skills/cmux-settings/scripts/cmux-settings" \
    "$HOME/.agents/skills/cmux-settings/scripts/cmux-settings"; do
    [[ -x "$candidate" ]] && CMUX_SETTINGS="$candidate" && break
  done
  [[ -n "${CMUX_SETTINGS:-}" ]] || {
    echo "cmux-settings helper not found; run from a cmux checkout or install cmux-settings" >&2
    exit 1
  }
fi

Shortcut model

Setting path: shortcuts.bindings.<actionId>.
Single stroke: "cmd+b".
Chord: ["ctrl+b","c"]. The first stroke needs a modifier unless the key is Space. The second stroke can be bare.
Unbind: prefer null for explicit unbinds. "", "none", "clear", "unbound", and "disabled" are accepted aliases, but null is the clearest JSON value and matches the templates below.
selectSurfaceByNumber and selectWorkspaceByNumber must use a digit from 1 to 9. cmd+1 means the full cmd+1 through cmd+9 family.
showHideAllWindows is the only system-wide shortcut. It cannot be a chord, requires modifiers, and may be rejected by macOS if reserved.
globalSearch is application-scoped and only fires while cmux is active.
showHideAllWindows also requires Settings > Global Hotkey > Enable System-Wide Hotkey. The binding can validate in cmux.json while the feature is disabled, so warn the user to enable that setting before reporting the shortcut as usable.
unset deletes a cmux.json override. It does not clear shortcut changes saved through the Settings UI/UserDefaults. If the user asks for true built-in defaults, tell them to use Settings > Keyboard Shortcuts > Reset Default Shortcuts after clearing file-managed overrides, then verify in the app. For showHideAllWindows, use Settings > Global Hotkey to restore the shortcut to ctrl+opt+cmd+. because Keyboard Shortcuts > Reset Default Shortcuts intentionally skips the global hotkey.
Saving cmux.json live reloads. Never tell the user to restart cmux.

Workflow

Classify the request:

One-off rebind/unbind: map the phrase to an action ID, apply, validate, report previous and new binding.
Audit: inspect bindings, validate, summarize overrides and unbound shortcuts without writing.
Reset: clarify file-managed overrides vs true built-in defaults (see the unset rule above).
Broad customization: propose 3-5 templates below and ask the user to choose.
Named style (tmux, Vim, iTerm, browser, agent triage): pick the closest template, show the changed actions and likely collisions, and ask before a bulk apply unless the user already named that template.

Inspect existing config:

bash

   "$CMUX_SETTINGS" path
   "$CMUX_SETTINGS" get shortcuts.bindings 2>/dev/null || printf '{}\n'
   "$CMUX_SETTINGS" validate

Snapshot prior values for every action you will change. A path that was absent reverts with unset; a path with an existing custom value reverts with set <same-json-value>.

bash

   "$CMUX_SETTINGS" get shortcuts.bindings.focusLeft 2>/dev/null || printf '<absent>\n'

Apply only the chosen action paths, then "$CMUX_SETTINGS" validate.

bash

   "$CMUX_SETTINGS" set shortcuts.bindings.newSurface '["ctrl+b","c"]'
   "$CMUX_SETTINGS" set shortcuts.bindings.focusLeft cmd+opt+h
   "$CMUX_SETTINGS" set shortcuts.bindings.sendFeedback null

Read back each changed action: "$CMUX_SETTINGS" get shortcuts.bindings.newSurface.
Finish with the template name, changed actions, and exact revert commands from the snapshot.

Preset templates

Apply action by action, never by overwriting the whole shortcuts.bindings object.

Tmux Prefix

One terminal-style namespace; ctrl+b starts a cmux chord instead of reaching the shell.

bash

"$CMUX_SETTINGS" set shortcuts.bindings.newSurface '["ctrl+b","c"]'
"$CMUX_SETTINGS" set shortcuts.bindings.closeTab '["ctrl+b","x"]'
"$CMUX_SETTINGS" set shortcuts.bindings.nextSurface '["ctrl+b","n"]'
"$CMUX_SETTINGS" set shortcuts.bindings.prevSurface '["ctrl+b","p"]'
"$CMUX_SETTINGS" set shortcuts.bindings.selectSurfaceByNumber '["ctrl+b","1"]'
"$CMUX_SETTINGS" set shortcuts.bindings.splitRight '["ctrl+b","v"]'
"$CMUX_SETTINGS" set shortcuts.bindings.splitDown '["ctrl+b","s"]'
"$CMUX_SETTINGS" set shortcuts.bindings.focusLeft '["ctrl+b","h"]'
"$CMUX_SETTINGS" set shortcuts.bindings.focusDown '["ctrl+b","j"]'
"$CMUX_SETTINGS" set shortcuts.bindings.focusUp '["ctrl+b","k"]'
"$CMUX_SETTINGS" set shortcuts.bindings.focusRight '["ctrl+b","l"]'
"$CMUX_SETTINGS" set shortcuts.bindings.toggleSplitZoom '["ctrl+b","z"]'
"$CMUX_SETTINGS" set shortcuts.bindings.toggleTerminalCopyMode '["ctrl+b","["]'
"$CMUX_SETTINGS" set shortcuts.bindings.equalizeSplits '["ctrl+b","="]'

macOS Terminal/iTerm Restore

These actions already match cmux built-in defaults, so clear file overrides rather than writing default values.

bash

for a in newSurface closeTab nextSurface prevSurface selectSurfaceByNumber \
         splitRight splitDown toggleSplitZoom toggleTerminalCopyMode renameTab; do
  "$CMUX_SETTINGS" unset "shortcuts.bindings.$a"
done

Vim Pane Navigation

Prefix-free pane movement with no arrow keys.

bash

"$CMUX_SETTINGS" set shortcuts.bindings.focusLeft cmd+opt+h
"$CMUX_SETTINGS" set shortcuts.bindings.focusDown cmd+opt+j
"$CMUX_SETTINGS" set shortcuts.bindings.focusUp cmd+opt+k
"$CMUX_SETTINGS" set shortcuts.bindings.focusRight cmd+opt+l
"$CMUX_SETTINGS" set shortcuts.bindings.splitRight cmd+opt+v
"$CMUX_SETTINGS" set shortcuts.bindings.splitDown cmd+opt+s
"$CMUX_SETTINGS" set shortcuts.bindings.toggleSplitZoom cmd+opt+z
"$CMUX_SETTINGS" set shortcuts.bindings.equalizeSplits cmd+opt+=

Agent Triage

Unread handling on one key family. toggleUnread stays on cmd+opt+u so this composes with Vim Pane Navigation without colliding with cmd+opt+j.

bash

"$CMUX_SETTINGS" set shortcuts.bindings.showNotifications cmd+u
"$CMUX_SETTINGS" set shortcuts.bindings.jumpToUnread cmd+j
"$CMUX_SETTINGS" set shortcuts.bindings.markOldestUnreadAndJumpNext cmd+shift+j
"$CMUX_SETTINGS" set shortcuts.bindings.toggleUnread cmd+opt+u
"$CMUX_SETTINGS" set shortcuts.bindings.triggerFlash cmd+shift+h
"$CMUX_SETTINGS" set shortcuts.bindings.focusRightSidebar cmd+shift+e

Workspace And Surface Lanes

Workspaces and surfaces on distinct number and bracket lanes.

bash

"$CMUX_SETTINGS" set shortcuts.bindings.selectWorkspaceByNumber cmd+1
"$CMUX_SETTINGS" set shortcuts.bindings.selectSurfaceByNumber cmd+opt+1
"$CMUX_SETTINGS" set shortcuts.bindings.nextSidebarTab 'cmd+opt+]'
"$CMUX_SETTINGS" set shortcuts.bindings.prevSidebarTab 'cmd+opt+['
"$CMUX_SETTINGS" set shortcuts.bindings.nextSurface 'cmd+shift+]'
"$CMUX_SETTINGS" set shortcuts.bindings.prevSurface 'cmd+shift+['

Browser Defaults Restore

Return embedded-browser behavior to common macOS browser shortcuts. unset keeps future cmux defaults applying.

bash

for a in openBrowser focusBrowserAddressBar browserBack browserForward browserReload \
         browserZoomIn browserZoomOut browserZoomReset toggleBrowserDeveloperTools \
         showBrowserJavaScriptConsole find findNext findPrevious; do
  "$CMUX_SETTINGS" unset "shortcuts.bindings.$a"
done

Terminal-First Cleanup

Fewer app-level shortcuts. Prefer unbinding only the actions the user names; this is a starting proposal.

bash

for a in renameTab renameWorkspace editWorkspaceDescription triggerFlash sendFeedback; do
  "$CMUX_SETTINGS" set "shortcuts.bindings.$a" null
done

Rules

Do not edit ~/.config/cmux/settings.json unless the user explicitly asks; it is legacy fallback config.
Do not overwrite all of shortcuts.bindings unless the user wants a full replacement.
Do not invent action IDs. Validate against the schema or shortcut-actions.md.
Do not apply a broad template without showing the changed actions first, unless the user named that template.
Do not promise conflict detection from cmux-settings validate. It validates JSON and supported keys, not shortcut syntax, macOS reservation, or focus-context conflicts.
Before assigning cmd+[ or cmd+] to application-scoped actions, warn that they collide with browser Back/Forward unless the browser actions are also changed or unbound.
unset clears file-managed overrides for one action. Do not call that a built-in default reset unless Settings UI/UserDefaults values were also reset.

cmux-keyboard-shortcuts