mohitmishra786/low-level-dev-skills

device-tree

Device tree skill for Linux hardware description.

Ver código-fonte

Como usar

  1. Copie o comando e verifique o pacote antes de instalar no seu ambiente de agente.
  2. Consulte no original as ferramentas, credenciais e ambientes necessários.
  3. Descreva os dados de entrada e a entrega esperada; confira a saída com as fontes.
npx skills add https://github.com/mohitmishra786/low-level-dev-skills --skill device-tree

Antes de começar

  • A instalação não inclui assinatura de modelo, franquia API ou acesso aos seus arquivos.
  • Estrelas e instalações indicam atividade, não um teste independente de qualidade ou segurança.
Documento original do Skill

Renderizado do repositório de origem, preservando títulos, exemplos, código, tabelas, links e imagens.

Device Tree (Devicetree)

Purpose

Guide agents through Linux device tree source (DTS): syntax, bindings, phandles, overlays, and how the kernel OF (Open Firmware) layer parses hardware description into platform_device instances.

When to Use

  • Platform driver not probing — DT mismatch
  • Adding a new board .dts or fragment overlay
  • Understanding compatible, reg, interrupts, clocks properties
  • Cross-checking hardware with skills/kernel-dev/platform-device-model

Workflow

1. DTS structure

dts
/dts-v1/;
#include "soc.dtsi"

/ {
    model = "My Board";
    compatible = "vendor,my-board", "vendor,soc-family";

    soc {
        uart0: serial@40011000 {
            compatible = "vendor,uart";
            reg = <0x40011000 0x400>;
            interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
            clocks = <&clk_uart0>;
            status = "okay";
        };
    };
};

2. Key properties

PropertyMeaning
compatibleDriver match string (most specific first)
regMMIO address + length ( #address-cells, #size-cells )
interruptsIRQ specifier (interrupt parent defines cells)
clocks / clock-namesphandle to clock provider
status"disabled" skips probe

3. Phandles

dts
clk_uart0: clock-uart {
    compatible = "vendor,clk";
    #clock-cells = <0>;
};

serial@... {
    clocks = <&clk_uart0>;  /* phandle reference */
};

4. Kernel parsing

OF core reads DTB at boot
├── of_platform_populate() creates platform_devices
└── driver `.of_match_table` matches `compatible`
c
static const struct of_device_id my_of_match[] = {
    { .compatible = "vendor,uart" },
    { }
};
MODULE_DEVICE_TABLE(of, my_of_match);

5. Compile and inspect

bash
dtc -I dts -O dtb -o board.dtb board.dts
dtc -I fs -O dts /proc/device-tree 2>/dev/null | less
ls /sys/firmware/devicetree/base/

Bindings live at devicetree.org — always cite binding name in commits.

6. Overlays (configfs)

bash
# Runtime overlay apply (when CONFIG_OF_OVERLAY)
mkdir -p /config/device-tree/overlays/my-overlay
cat my-overlay.dtbo > /config/device-tree/overlays/my-overlay/dtbo

7. Agent usage

/device-tree Write DTS fragment for I2C sensor on i2c1 with interrupt on GPIO5

Common Problems

SymptomCauseFix
Driver not boundcompatible typoMatch driver's of_match_table
Wrong MMIO#address-cells mismatchFollow SoC .dtsi
IRQ not firingWrong interrupt parent/cellsCopy from working board DTS
Probe defer loopClock/regulator missing-EPROBE_DEFER supplier in DT
Overlay failsSymbol unresolved__fixups__ / label exports

Related Skills

  • skills/kernel-dev/platform-device-model — probe and sysfs
  • skills/kernel/device-drivers — devm_of_iomap
  • skills/baremetal/datasheet-and-refmanual-reading — HW to DT mapping
  • skills/embedded/zephyr — Zephyr devicetree (different tooling)
  • skills/kernel-dev/bus-drivers-i2c-spi — bus node children

Relacionados por tarefa

do mesmo repositório

Mais Skills

Todos os Skills
mohitmishra786
Comunidade

low-power-embedded

Low-power embedded skill for sleep modes and energy optimization. Use when configuring MCU sleep/stop/standby, peripheral clock gating, wake-up sources, or measuring firmware current draw. Activates on queries about WFI, STOP mode, STM32 PWR, nRF sleep, wake-up EXTI, or reducing embedded power consumption.

Instalações / 1h
1
GitHub Stars
296
Atualizado
20 de nov.
mohitmishra786
Comunidade

core-dumps

Core dump analysis skill for production crash triage. Use when loading core files in GDB or LLDB, enabling core dump generation on Linux/macOS, mapping symbols with debuginfo or debuginfod, or extracting backtraces from crashes without re-running the program. Activates on queries about core files, ulimit, coredumpctl, debuginfod, crash triage, or analyzing segfaults from production binaries.

Instalações / 1h
2
GitHub Stars
267
Atualizado
27 de jun.
mohitmishra786
Comunidade

custom-allocators

Custom allocator skill for memory allocation strategies. Use when implementing pool/slab/arena allocators, tuning jemalloc/mimalloc, writing Rust GlobalAlloc, or benchmarking allocator performance. Activates on queries about jemalloc, mimalloc, tcmalloc, arena allocator, GlobalAlloc, or fragmentation.

Instalações / 1h
2
GitHub Stars
267
Atualizado
27 de jun.
mohitmishra786
Comunidade

ebpf

eBPF skill for Linux observability and networking. Use when writing eBPF programs with libbpf or bpftrace, attaching kprobes/tracepoints/XDP hooks, debugging verifier errors, working with eBPF maps, or achieving CO-RE portability across kernel versions. Activates on queries about eBPF, bpftool, bpftrace, XDP programs, libbpf, verifier errors, eBPF maps, or kernel tracing with BPF.

Instalações / 1h
2
GitHub Stars
267
Atualizado
27 de jun.