Cómo usar
- Copia el comando y revisa el paquete antes de instalarlo en tu entorno de agente.
- Consulta las herramientas, credenciales y entornos necesarios en el documento original.
- Describe las entradas y el resultado deseado; contrasta la salida con las fuentes.
npx skills add https://github.com/baratilab/mechanical-engineering-skills --skill drawing-gdt-reviewAntes de empezar
- La instalación no incluye suscripción al modelo, cuota API ni permisos sobre tus archivos.
- Las estrellas e instalaciones reflejan actividad, no una prueba independiente de calidad o seguridad.
Contenido del repositorio de origen con títulos, ejemplos, código, tablas, enlaces e imágenes preservados.
Drawing & GD&T Review
Workflow
- Ingest. Render PDF pages to PNG at 200+ dpi (
pdftoppm -r 200 -png drawing.pdf page) and view each one. For DXF, list the entities withezdxf. Zoom into the title block, the notes, and each view. - Identify the standard: ASME Y14.5-2018 or ISO 1101 / ISO 8015 (look for "ISO 8015" or a projection symbol in the title block). Also note the projection type (first or third angle). All later judgments depend on this.
- Understand function first. In 2–3 lines, write what the part does and which features mate with other parts. GD&T should control those features. Ask about function only if you can't infer it.
- Run the checklist in
references/checklist.md, section by section. For each finding, record the location (sheet / view / zone), the issue, the severity, and the fix. Severity scale:
- Critical: the part can't be made or inspected as drawn, or the drawing contradicts itself.
- Major: ambiguous, so a supplier could legally make a non-functional part.
- Minor: a standards or style deviation.
- Suggestion: a cost-reduction or clarity improvement.
- GD&T sanity rules (the most common errors):
- Datum features must be physical, stable, and functional. The primary datum should constrain 3 degrees of freedom on mating parts.
- Position needs basic dimensions to the datums. ± dimensions on a positioned feature are a Critical error.
- Datum references go in precedence order (A|B|C), and the order must match the part's assembly order.
- MMC (Ⓜ) applies only to features of size. Using it on a planar surface is an error.
- Flatness or straightness tolerance must be tighter than the size tolerance (Rule #1, Y14.5).
- Profile without datums controls form only. Check whether location was intended.
- Runout and concentricity: Y14.5-2018 removed concentricity and symmetry. Recommend position or profile instead.
- Tolerance reasonableness. Flag tolerances tighter than the process can hold (see
dfm-review's process tables), and tolerances that are loose on mating features. - Output: a table sorted by severity, then a short summary (counts by severity and the top 3 fixes). If asked for a red-line, annotate the page PNG with numbered balloons (PIL) that match the table rows.