mohitmishra786/low-level-dev-skills

gpio-baremetal

Bare-metal GPIO skill for pin configuration and interrupts.

Ver código fuente

Cómo usar

  1. Copia el comando y revisa el paquete antes de instalarlo en tu entorno de agente.
  2. Consulta las herramientas, credenciales y entornos necesarios en el documento original.
  3. Describe las entradas y el resultado deseado; contrasta la salida con las fuentes.
npx skills add https://github.com/mohitmishra786/low-level-dev-skills --skill gpio-baremetal

Antes de empezar

  • La instalación no incluye suscripción al modelo, cuota API ni permisos sobre tus archivos.
  • Las estrellas e instalaciones reflejan actividad, no una prueba independiente de calidad o seguridad.
Documento original del Skill

Contenido del repositorio de origen con títulos, ejemplos, código, tablas, enlaces e imágenes preservados.

GPIO (Bare-Metal)

Purpose

Configure and use GPIO without HAL: input/output modes, alternate function mapping, pull-up/down, speed/slew, and pin-change interrupts for LEDs, buttons, and peripheral pin mux.

When to Use

  • Blink LED or read button before bringing up UART/SPI
  • Mux pins to USART/SPI alternate functions
  • EXTI line interrupts on pin edges
  • Porting GPIO code between vendors

Workflow

1. STM32 GPIO pattern

c
/* Enable GPIOA clock */
RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN;

/* PA5 output — MODER[11:10] = 01 */
GPIOA->MODER &= ~(3U << (5 * 2));
GPIOA->MODER |=  (1U << (5 * 2));

/* Toggle via BSRR — atomic set/reset */
GPIOA->BSRR = (1U << 5);       /* set */
GPIOA->BSRR = (1U << (5+16));  /* reset */

Alternate function (e.g., USART2 TX on PA2):

c
GPIOA->MODER &= ~(3U << (2*2));
GPIOA->MODER |=  (2U << (2*2));           /* AF mode */
GPIOA->AFR[0] &= ~(0xFU << (2*4));
GPIOA->AFR[0] |=  (7U << (2*4));          /* AF7 = USART2 */

2. Input with pull-up

c
/* PC13 input, pull-up */
GPIOC->MODER &= ~(3U << (13*2));          /* input mode 00 */
GPIOC->PUPDR &= ~(3U << (13*2));
GPIOC->PUPDR |=  (1U << (13*2));          /* pull-up */

int pressed = !(GPIOC->IDR & (1U << 13)); /* active low */

3. EXTI interrupt (STM32)

c
/* SYSCFG: map EXTI13 to PC13 */
SYSCFG->EXTICR[3] = (SYSCFG->EXTICR[3] & ~0xFU) | 0x2;  /* port C */
EXTI->IMR  |= (1U << 13);
EXTI->FTSR |= (1U << 13);  /* falling edge */
NVIC_EnableIRQ(EXTI15_10_IRQn);

ISR: check EXTI->PR, clear with write-1.

4. nRF52 / ESP32 notes

PlatformPattern
nRF52NRF_P0->PIN_CNF[n] — direction, pull, drive
ESP32GPIO.out_w1ts, GPIO.enable; IO_MUX for function

Always enable peripheral clock / power domain before pin config.

5. Agent usage

/gpio-baremetal Configure PA2 as USART2 TX alternate function on STM32F4

Common Problems

SymptomCauseFix
Pin stuckWrong MODER / not AFRe-read RM pin table
EXTI stormNo debounce / floating inputEnable pull; debounce in software
AF mismatchWrong AFR nibblePin-specific AF table in RM
No toggle visibleWrong port bit / LED active lowCheck schematic

Related Skills

  • skills/baremetal/mmio-and-bit-manipulation — BSRR/MODER masks
  • skills/baremetal/peripherals-from-datasheet — RM pinout tables
  • skills/baremetal/uart-serial-baremetal — AF mux for serial

Relacionados por tarea

del mismo repositorio

Más Skills

Todos los Skills
mohitmishra786
Comunidad

low-power-embedded

Low-power embedded skill for sleep modes and energy optimization. Use when configuring MCU sleep/stop/standby, peripheral clock gating, wake-up sources, or measuring firmware current draw. Activates on queries about WFI, STOP mode, STM32 PWR, nRF sleep, wake-up EXTI, or reducing embedded power consumption.

Instalaciones / 1h
1
GitHub Stars
296
Actualizado
20 nov
mohitmishra786
Comunidad

core-dumps

Core dump analysis skill for production crash triage. Use when loading core files in GDB or LLDB, enabling core dump generation on Linux/macOS, mapping symbols with debuginfo or debuginfod, or extracting backtraces from crashes without re-running the program. Activates on queries about core files, ulimit, coredumpctl, debuginfod, crash triage, or analyzing segfaults from production binaries.

Instalaciones / 1h
2
GitHub Stars
267
Actualizado
27 jun
mohitmishra786
Comunidad

custom-allocators

Custom allocator skill for memory allocation strategies. Use when implementing pool/slab/arena allocators, tuning jemalloc/mimalloc, writing Rust GlobalAlloc, or benchmarking allocator performance. Activates on queries about jemalloc, mimalloc, tcmalloc, arena allocator, GlobalAlloc, or fragmentation.

Instalaciones / 1h
2
GitHub Stars
267
Actualizado
27 jun
mohitmishra786
Comunidad

ebpf

eBPF skill for Linux observability and networking. Use when writing eBPF programs with libbpf or bpftrace, attaching kprobes/tracepoints/XDP hooks, debugging verifier errors, working with eBPF maps, or achieving CO-RE portability across kernel versions. Activates on queries about eBPF, bpftool, bpftrace, XDP programs, libbpf, verifier errors, eBPF maps, or kernel tracing with BPF.

Instalaciones / 1h
2
GitHub Stars
267
Actualizado
27 jun