mohitmishra786/low-level-dev-skills

spi-i2c-baremetal

Bare-metal SPI and I2C skill for serial peripheral buses.

ソースを見る

使い方

  1. インストールコマンドをコピーし、自分の環境へ導入する前にソースを確認します。
  2. 必要なツール、認証情報、対応環境を原文で確認します。
  3. 入力と成果物を指定し、出力を資料と照合します。
npx skills add https://github.com/mohitmishra786/low-level-dev-skills --skill spi-i2c-baremetal

開始前の確認

  • 導入にはモデル契約、API枠、ファイルへのアクセス許可は含まれません。
  • スター数や導入数は活動の指標であり、独立した品質・安全性試験ではありません。
リポジトリの原文

見出し、例、コード、表、リンク、参照画像を含む原文を表示しています。

SPI and I2C (Bare-Metal)

Purpose

Implement SPI and I2C master drivers for sensor and memory chips: clock configuration, phase/polarity (SPI), START/ACK sequences (I2C), and common register-oriented transaction patterns.

When to Use

  • Reading an I2C sensor (WHOAMI register)
  • SPI flash or display bring-up
  • Debugging NACK or stuck SCL
  • Replacing HAL_I2C/SPI with minimal code

Workflow

1. SPI master (STM32)

c
/* Mode 0: CPOL=0, CPHA=0 — check slave datasheet */
SPI1->CR1 = SPI_CR1_MSTR | SPI_CR1_SSM | SPI_CR1_SSI
          | (3 << SPI_CR1_BR_Pos);  /* baud divider */
SPI1->CR1 |= SPI_CR1_SPE;

uint8_t spi_xfer(SPI_TypeDef *spi, uint8_t tx) {
    while (!(spi->SR & SPI_SR_TXE))
        ;
    *(volatile uint8_t *)&spi->DR = tx;
    while (!(spi->SR & SPI_SR_RXNE))
        ;
    return *(volatile uint8_t *)&spi->DR;
}

CS (GPIO bit-bang):

c
GPIO_CS_LOW();
spi_xfer(SPI1, reg | 0x80);  /* read */
uint8_t val = spi_xfer(SPI1, 0xFF);
GPIO_CS_HIGH();

2. I2C master — register read

c
/* START → addr+W → reg → repeated START → addr+R → data → STOP */
bool i2c_read_reg(I2C_TypeDef *i2c, uint8_t dev7, uint8_t reg, uint8_t *out) {
    if (!i2c_start(i2c)) return false;
    if (!i2c_tx(i2c, (dev7 << 1) | 0)) return false;
    if (!i2c_tx(i2c, reg)) return false;
    if (!i2c_restart(i2c)) return false;
    if (!i2c_tx(i2c, (dev7 << 1) | 1)) return false;
    *out = i2c_rx(i2c, false);  /* NACK last byte */
    i2c_stop(i2c);
    return true;
}

Poll SB, ADDR, TXE, RXNE, BTF per reference manual.

3. Common protocols

PatternBus
reg + write dataI2C/SPI
`0x80reg` read (MSB set)SPI sensors
16-bit big-endian length prefixSPI flash

4. Agent usage

/spi-i2c-baremetal I2C read of register 0x0F from device 0x68

Common Problems

SymptomCauseFix
I2C NACKWrong 7-bit addr (8-bit in datasheet)Shift addr; check R/W bit
SPI garbageCPOL/CPHA mismatchMatch slave mode table
Bus stuck SCL lowSlave clock stretch / faultBus recovery (clock pulses)
CS glitchCS timing vs clockAssert CS before first SCK

Related Skills

  • skills/baremetal/gpio-baremetal — CS, SDA, SCL pins
  • skills/baremetal/peripherals-from-datasheet — timing requirements
  • skills/kernel-dev/bus-drivers-i2c-spi — Linux kernel side

タスクに関連する項目

同じリポジトリから

関連する Skills

すべての Skills
mohitmishra786
コミュニティ

low-power-embedded

Low-power embedded skill for sleep modes and energy optimization. Use when configuring MCU sleep/stop/standby, peripheral clock gating, wake-up sources, or measuring firmware current draw. Activates on queries about WFI, STOP mode, STM32 PWR, nRF sleep, wake-up EXTI, or reducing embedded power consumption.

1時間の導入数
1
GitHub Stars
296
更新日
11月20日
mohitmishra786
コミュニティ

core-dumps

Core dump analysis skill for production crash triage. Use when loading core files in GDB or LLDB, enabling core dump generation on Linux/macOS, mapping symbols with debuginfo or debuginfod, or extracting backtraces from crashes without re-running the program. Activates on queries about core files, ulimit, coredumpctl, debuginfod, crash triage, or analyzing segfaults from production binaries.

1時間の導入数
2
GitHub Stars
267
更新日
6月27日
mohitmishra786
コミュニティ

custom-allocators

Custom allocator skill for memory allocation strategies. Use when implementing pool/slab/arena allocators, tuning jemalloc/mimalloc, writing Rust GlobalAlloc, or benchmarking allocator performance. Activates on queries about jemalloc, mimalloc, tcmalloc, arena allocator, GlobalAlloc, or fragmentation.

1時間の導入数
2
GitHub Stars
267
更新日
6月27日
mohitmishra786
コミュニティ

ebpf

eBPF skill for Linux observability and networking. Use when writing eBPF programs with libbpf or bpftrace, attaching kprobes/tracepoints/XDP hooks, debugging verifier errors, working with eBPF maps, or achieving CO-RE portability across kernel versions. Activates on queries about eBPF, bpftool, bpftrace, XDP programs, libbpf, verifier errors, eBPF maps, or kernel tracing with BPF.

1時間の導入数
2
GitHub Stars
267
更新日
6月27日