meticulous-fix

To fix diffs that have already been reviewed and rejected, follow the workflow below step by step, using the CLI or MCP commands as described.

Before starting, run the meticulous-cli-update skill to ensure the Meticulous CLI and skills are up to date — unless it has already run earlier in this conversation, in which case skip it.

This skill assumes the review has already happened — a user (or the meticulous-review skill) has gone through the run and rejected the diffs that are real problems, possibly leaving comments explaining what's wrong or what to do about it, though comments aren't a given. Your job here is narrower than a full review: don't re-litigate diffs that weren't rejected, and don't second-guess the rejection itself — just work out what needs to change and make it happen.

Step 1 -- Get the rejected diffs and any commented-on diffs

# CLI
meticulous agent test-run-diffs --onlyRejected --onlyWithComments --includeReviews

# MCP (git context is never inferred — pass a commit or test run explicitly)
get_test_run_diffs(testRunId="<id>", onlyRejected=true, onlyWithComments=true, includeReviews=true)

Important — these `--only flags are additive (OR'd):** passing both --onlyRejected and --onlyWithComments returns every diff that's rejected, has an open comment, or both — not just the intersection — since a comment on a diff that wasn't formally rejected may still contain an instruction worth acting on. --includeAllDiffs is implied, so this spans the full run rather than just the selected subset; --includeReviews adds decision/openComments` columns so you can tell which case each row is.

Not every commented row is a fix target. The meticulous-review skill's ignore-diff posts a flake/noise note and leaves the diff unreviewed — that comment is not a fix instruction. When reading Step 1's rows, skip diffs whose only open comments are ignore/flake notes; leave those threads alone.

Step 2 -- Read the review comments for diffs that have any

For each diff with openComments > 0:

# CLI
meticulous agent diff-comments --replayDiffId <replayDiffId> --screenshotName <screenshotName>

# MCP
get_diff_comments(replayDiffId="<replayDiffId>", screenshotName="<screenshotName>")

This is your primary source of instructions — a comment usually says what's wrong and, often, what to do about it. Read every comment and its replies (nested oldest-first) before starting on that diff; a reply can narrow down or redirect an earlier comment's ask.

For a rejected diff with no comments, there's nothing to read here — the visual/structural context next is what you'll rely on instead.

Step 3 -- Get the visual and structural context

Reuse the inspection mechanics from the meticulous-review skill for each diff:

# CLI
meticulous agent image-files --replayDiffId <replayDiffId> --screenshotName <screenshotName>
meticulous agent dom-diff --replayDiffId <replayDiffId> --screenshotName <screenshotName>

# MCP
get_image_urls(replayDiffId="<replayDiffId>", screenshotName="<screenshotName>")
get_dom_diff(replayDiffId="<replayDiffId>", screenshotName="<screenshotName>")

See the meticulous-review skill's Steps 2-3 for output formats and the optional timeline (agent timeline-diff) if the cause still isn't clear.

Fallback for a rejected diff with no comments: this context is now your primary source of instruction, not just extra background — treat it the same way the meticulous-review skill's Decision guide would, and use your own judgment to figure out what regression the rejection is pointing at.

Step 4 -- Fix the underlying code

For each fix target — a rejected diff, or a non-rejected diff whose comments ask for a concrete fix — make the code change that resolves the comment's instructions (or, in the no-comment fallback, the regression you identified). Skip ignore/flake-only threads from Step 1; do not change code for them and do not reply on them. A single code change may resolve multiple fix-target diffs at once (e.g. one component bug causing several screenshot diffs) — don't fix the same root cause repeatedly.

Close the loop on every fix-target diff — fixed or not — by replying to its comment thread (or creating one if it had none):

# CLI
meticulous agent reply-to-diff-comment --commentId=<id> --text="<message>"
meticulous agent create-diff-comment --replayDiffId=<id> --screenshotName=<name> --text="<message>" --x=<0..1> --y=<0..1>

# MCP
reply_to_diff_comment(commentId="<id>", text="<message>")
create_diff_comment(replayDiffId="<id>", screenshotName="<name>", text="<message>", x=<0..1>, y=<0..1>)

Use reply-to-diff-comment when the diff already has a comment thread — pass the thread's root id from Step 2 (the row with a blank replyToCommentId), not a reply's id. Use create-diff-comment only when the diff was rejected with no existing comment (the no-comment fallback case), since there's no thread to reply to.

• Fixed — reply/comment "Fixed."
• Not fixable (a comment asks for something that isn't actually possible — contradicts another requirement, describes behavior that doesn't exist, references something you can't find, etc.) — don't guess; explain why, so the reviewer sees it without having to ask you again.

Either way, move on to the next fix-target diff; report it at the end (see the final report below).

Step 5 -- Commit, push, and let CI confirm

1. Commit the fixes. Note in the commit message that this addressed Meticulous review feedback, specific enough that git log alone tells the story later:

   Fix layout shift in checkout header

   Addresses Meticulous review feedback on test run <testRunId>:
   - <replayDiffId>/<screenshotName>: <brief on what was wrong and the fix>

1. Push the branch (git push origin <branch> — see your git push rules).
2. Author credit: if the PR description already credits an AI coding assistant as (co-)author (e.g. "Created by Claude Code", "Co-authored-by: Cursor", "🤖 Generated with Claude Code") and doesn't already mention Meticulous, add "and Meticulous" to that mention — e.g. "Created by Claude Code and Meticulous" — since Meticulous's review feedback drove this fix. Don't add a Meticulous author credit if no such line already exists; there's nothing to append it to.
3. Wait for CI to trigger its own new Meticulous test run for the pushed commit, then confirm the previously-flagged diffs are actually resolved:

   # CLI (resolves from local git HEAD — already the pushed commit)
   meticulous agent test-run-for-commit
   meticulous agent test-run-diffs --onlyRejected --onlyWithComments --includeReviews

   # MCP (git context is never inferred — resolve the testRunId from the local HEAD commit first)
   get_test_run_for_commit(commitSha="<sha>")
   get_test_run_diffs(testRunId="<id>", onlyRejected=true, onlyWithComments=true, includeReviews=true)

If a diff you believed you fixed is still showing up (decisions/comments carry forward from the compared run), your fix didn't address the root cause; go back to Step 3/4 for that one, then repeat this step.

Step 6 -- Final report

Summarize the outcome, covering every fix-target diff from Step 1 (omit ignore/flake-only rows you skipped). Link every diff you mention: https://app.meticulous.ai/test-runs/<testRunId>/replay-diff/<replayDiffId>?screenshot=<screenshotName>.

1. Fixed: which diffs were resolved, what the underlying code change was, and which comment(s) it addressed, if any.
2. Not fixed (if any): which diffs couldn't be addressed, and why — e.g. the comment's ask wasn't possible, was ambiguous, or conflicted with something else. Note that you left this explanation as a reply/comment on the diff (Step 4) — don't just leave it in the report where only this conversation sees it. Be specific enough that a human reviewer can pick this back up without re-deriving what you already found.

Post this report as a comment on the PR itself, in addition to delivering it here (e.g. gh pr comment <number> --body "..." for GitHub, glab mr note <id> --message "..." for GitLab, or a POST /2.0/repositories/{workspace}/{repo_slug}/pullrequests/{id}/comments call with body {"content": {"raw": "..."}} for Bitbucket).

Step 7 -- Report feedback to Meticulous

As the last step, submit one brief feedback note to the Meticulous team: did the rejections/comments give you enough to work with, was anything ambiguous, and what would have made the handoff easier?

# CLI
meticulous agent submit-feedback --message="<one or two sentences>" --outcome=<helped|neutral|hindered> --testRunId=<id> --skill=meticulous-fix

# MCP
submit_feedback(message="<one or two sentences>", outcome="<helped|neutral|hindered>", testRunId="<id>", skill="meticulous-fix")