install-and-verify

Reticle: prove the change, do not guess

Reticle embeds a dev-only SDK in the user's running app and exposes it to you as reticle_* MCP tools. You look, act, observe, and assert against the real app. No screenshots, and no browser download for the verify loop: it drives the tab the user already has open. (A driven browser, which reticle_lease and --drive use, does need Chromium; Reticle says so when it needs one.)

Where the rest of the documentation is

Everything not in this file is at https://docs.reticle.sh, and it is built to be fetched rather than browsed. Append `.md` to any page URL to get its source with no site chrome, so you can pull one page instead of a whole document you mostly do not need:

curl https://docs.reticle.sh/llms.txt                  # every page title and URL, small enough to read whole
curl https://docs.reticle.sh/cli/doctor.md             # one CLI command: flags, real output, exit codes
curl https://docs.reticle.sh/tools/act-and-wait.md     # one tool: arguments and what a verdict means
curl https://docs.reticle.sh/troubleshooting.md        # the failures people actually hit

Read llms.txt first and pick the one page that answers the question. That is almost always cheaper than pulling a large file and hoping the part you need survived. There is a /llms-full.txt with the entire site in one file; use it only to seed a context window deliberately.

Every page arrives with the four rules that matter prepended, whether you asked for them or not, so a single fetch orients you without a second call.

Which path am I on

cat .reticle.json 2>/dev/null || echo NOT_FOUND

• NOT_FOUND → SETUP below.
• File exists → VERIFY below. If reticle_sessions then returns an empty list, go to references/troubleshooting.md; do not restart setup.

Both paths are about THIS PROJECT. The machine step is separate and comes first: one command that puts the CLI on PATH and registers the MCP server with every agent it can reach.

curl -fsSL https://raw.githubusercontent.com/reticlehq/reticle/main/install/install.sh | sh     # macOS, Linux
irm https://raw.githubusercontent.com/reticlehq/reticle/main/install/install.ps1 | iex          # Windows PowerShell

If you can see `reticle_ tools, that already happened and you can ignore it.** If you cannot, hand the user that one line to run in a terminal and stop there. init` can register the MCP server itself, but doing it from inside a client that has already read its server list means the tools cannot appear until the client restarts, which ends your turn in the middle of setup. The terminal-first order is what removes that step, so do not work around it.

Read this before you touch SETUP

Installed means a verdict was produced. Writing config files is not installed.

Every earlier point looks like success and is not:

• init exited 0. Files were written. Nothing connected.
• The reticle_* tools appeared. Your client can reach a daemon. The app is very likely still uninstrumented.
• A session is listed. The app dialled in. The user has still seen nothing happen.

Do not tell the user Reticle is set up until step 5 has produced a verdict. The single most common outcome in the field is an agent that finishes step 1, reports success, and leaves a user with config files and no instrumented page.

Setup runs to the end without you

Do not stop, and do not ask the user anything, until their app is running with Reticle inside it and a session is connected. Everything between here and that point is yours to do: run init, fix the wiring it could not, start the dev server, open the browser. Not one of those needs a human, and every one of them has been the place an onboarding turn died with nothing to show.

Questions you must not ask, because the repo you are sitting in already answers them: which framework, which package manager, which port, which editor or MCP client, whether to start the dev server, whether to open the browser, whether to carry on. Decide, act, and say what you did in one line.

There are exactly three places you may stop, and none is a question about a preference:

1. No recognisable dev script in `package.json`. Say so; do not invent one.
2. Your host asks the human to approve a command. That prompt belongs to the host. Never bypass or suppress it, and take a refusal as the answer. init writing a pre-approval rule for the reticle server is not that: it is a scoped, announced config change the human asked for by running the command, and it covers only Reticle's own tools.
3. On a first install only, the client restart that loads the MCP tools (step 2). Even then, keep going until the app is running and connected, and stop for the restart last, with only the drive left.

Setup requires a client restart, which ends your turn. This skill survives that restart. After the restart, re-read this file and resume at the step you were on. Do not start over, and do not skip forward.

SETUP

One command wires the project. A second one proves a flow.

RETICLE_INSTALL_SOURCE=npx_skill npx @reticlehq/server@latest init

It detects the framework and package manager, wires the build config, installs the SDK, registers the MCP server, starts the dev server, opens the app, and waits for a session to connect from inside it. That connection IS the proof onboarding worked: the SDK is in the page and the tools have something to talk to. It exits non-zero if nothing connected, and prints exactly what is left to do.

Then prove a flow. That is the FIRST RUN, and it is a separate call:

reticle_verify { action: "explore", persona: "<who does what>" }

It drives the app with a model inside the daemon and RECORDS what it drove, so every later check replays that flow with no model in the loop.

What YOU decide, and pass in

The command reads the repository. It cannot read the request, and these live only there.

Add --license <key> if the user gave you one: it writes RETICLE_LICENSE_KEY to .env and keeps .env out of git.

Ask the user nothing else. Framework, package manager, port, editor, MCP client: every one is answerable from the repo you are sitting in.

Then read what it gives you back

A non-zero exit is a to-do list, not a failed install. The command names the cause and prints the REMAINING steps from wherever it stopped; it will not tell you to redo a phase that already worked. Do those and re-run, which is safe.

It is not finished until a verdict exists. Writing files is not an install, and neither is a connected session.

If that command could not run it

Do not choose this path. It is not the thorough version of the one above; it is what you fall back to when the command physically could not do the work. Use it only when init exited without ever printing starting: or ▸ WATCH (an older CLI that stops after writing files), or when it stopped in the same place twice after you did what it asked. A ⚠ in the report is not a reason: re-run the command, which is idempotent and names what is still outstanding.

curl https://docs.reticle.sh/install-manual.md      # register the MCP, wire the SDK, prove it
curl https://docs.reticle.sh/troubleshooting.md     # nothing connected, click did nothing, verdict unknown

License key

Enterprise features are unlocked by a signed key, verified locally with Ed25519 and no network call. If the user hands you one, during setup or at any later point:

1. Append RETICLE_LICENSE_KEY=<key> to the project's .env, creating the file if it is not there. The CLI folds a project-local .env into the environment on every invocation, so nothing else has to change.
2. Make sure .env is in .gitignore. A license key in git is a leaked credential, so check before you write and add the line if it is missing.
3. Confirm with npx @reticlehq/server license, which prints active, eval, missing or expired.

Never echo the key back in your reply, and never put it in a commit, a code comment, or a feedback report. The rest: curl https://docs.reticle.sh/enterprise.md.

VERIFY

Only `reticle_act_and_wait` and `reticle_assert` produce a verdict. Everything else (act, snapshot, query, navigate, observe, network, console) moves or reads the app and proves nothing. A drive that ends without one of those two has no result, however many tools it used.

Prefer reticle_act_and_wait({ ref, action, until }). It names the expected consequence before the action, which is the difference between a check and a rationalisation.

A verdict of verified: "unknown" is not a pass. It means Reticle drove the app and could not tell what happened. Report it as unknown.

Never weaken a check to make it pass.

Take the cheapest path that answers the question

Stop at the first row that fits. Do not hand-drive a flow you could replay.

The first two are not on the advertised tool list: they are reached through reticle_run exactly as written. That is the supported call shape, and it is why you have to be told they exist.

reticle_verify {action:"change"} answers unknown when no saved flow covers the files you changed. Nothing ran, so nothing was proved: that is the honest answer, never a pass, and it is the signal to record one (step 5 above).

The full loop (look, act, observe, assert), how to read a verdict, batching, and regression suites: references/verify.md.

Feedback is first-class

Reticle is built for agents. You are its user, and your experience is the only signal that decides what gets built or fixed. It disappears when your context does.

The moment Reticle breaks, lies, cannot see something you needed, costs too many calls, or gives you trouble during setup:

reticle_session { action: "feedback", kind, text }

kind is one of bug, gap, ambiguity, feature_request, improvement. One call, then carry on with the task.

If the tools are unreachable (setup unfinished, daemon down), file the same report from the shell:

npx @reticlehq/server feedback --agent --kind <bug|gap|ambiguity|feature_request|improvement> "what happened"

Nothing is too minor. Report defects in Reticle; a bug you find in the app under test is Reticle working and belongs in your answer to the user. Never put app source, secrets, or user data in a report.

References

• references/setup.md: per-framework SDK wiring, store registration, desktop apps.
• references/verify.md: the look, act, observe, assert loop and reading verdicts.
• references/troubleshooting.md: no session, port mismatch, non-localhost hosts, daemon problems.