wedsamuel1230/embedded-engineering-skills

enclosure-designer

Use when users need a 3D-printable enclosure for an Arduino, ESP32, or RP2040 project and need help with measurements, cutouts, print settings, or environmental protection.

Quelltext ansehen

Verwendung

  1. Installationsbefehl kopieren und das Quellpaket vor der Installation in der eigenen Agentenumgebung prüfen.
  2. Benötigte Werkzeuge, Zugangsdaten und Hosts im Original prüfen.
  3. Eingabe und gewünschtes Ergebnis beschreiben und die Ausgabe mit den Quellen abgleichen.
npx skills add https://github.com/wedsamuel1230/embedded-engineering-skills --skill enclosure-designer

Vor dem Start

  • Die Installation umfasst weder Modellabo noch API-Kontingent oder Dateizugriffsrechte.
  • Sterne und Installationen zeigen Aktivität, keine unabhängige Qualitäts- oder Sicherheitsprüfung.
Originales Skill-Dokument

Aus dem Quell-Repository gerendert; Überschriften, Beispiele, Code, Tabellen, Links und Bilder bleiben erhalten.

Enclosure Designer

Use this skill to design practical enclosures without loading a full mechanical guide up front.

Resources

  • assets/basic-template.scad - starting OpenSCAD template
  • scripts/generate_enclosure.py - enclosure generator script
  • references/design-workflow.md - measurement, parameter, and generator

workflow

  • references/dimensions.md - common board and module dimensions
  • references/print-and-protection.md - wall thickness, print settings,

ventilation, and waterproofing

When to Use

Use this skill when the user asks for:

  • an enclosure, case, box, or housing
  • mounting holes or cutout placement
  • OpenSCAD-based enclosure generation
  • board fit checks for Arduino, ESP32, or Pico-class boards
  • print-material or weather-resistance guidance

Workflow

  1. Gather the minimum physical inputs:
  • board dimensions
  • tallest component
  • connector locations
  • mounting method
  • environmental constraints
  1. Open references/design-workflow.md for the parameterization flow.
  2. Open references/dimensions.md if the user does not already have exact

measurements.

  1. Open references/print-and-protection.md for material, wall, ventilation,

or moisture guidance.

  1. Use assets/basic-template.scad or scripts/generate_enclosure.py when the

user needs a concrete starting model.

Core Rules

  • Treat user measurements as authoritative over reference dimensions.
  • Add clearance deliberately for connectors, wiring, and print tolerance.
  • Separate fit problems from printability problems.
  • Do not promise waterproofing from geometry alone.

Verification

  • The board and connectors fit with explicit clearance.
  • Mounting points and cable exits are reachable.
  • The selected material and wall thickness match the use environment.
  • Print orientation and support strategy are named before finalizing the design.

Integration

  • Pair with battery-selector or power-budget-calculator if battery size

drives the enclosure volume.

  • Pair with readme-generator when the enclosure should be documented for a

project repo.

Shared Output Contract

Use the shared Arduino skill contract: state assumptions, required tools and versions, implementation steps, tests/evidence by proof stage, known limitations, and recovery/security notes.

aus demselben Repository

Weitere Skills

Alle Skills
wedsamuel1230
Community

arduino-project-builder

Build complete Arduino and embedded projects across Arduino IDE, Arduino CLI, PlatformIO, and vendor-specific toolchains. Use when users request an application combining firmware, sensors, actuators, networking, power, or deployment rather than a code snippet. The bundled scaffold targets UNO, ESP32, and Raspberry Pi Pico; use the board profile and document limitations for other targets.

Installationen / 1h
1
GitHub Stars
33
Aktualisiert
15. Okt.
wedsamuel1230
Community

i2c-bringup-diagnostician

Use when users need to diagnose I2C bring-up failures on Arduino or ESP32-class boards, including no devices found, wrong readings, address conflicts, scanner-detects-but-library-fails cases, pull-up problems, or board-family-specific bus quirks.

Installationen / 1h
1
GitHub Stars
33
Aktualisiert
15. Okt.
wedsamuel1230
Community

arduino-code-generator

Generate Arduino and embedded C++ snippets for sensors, actuators, buses, state machines, timing, data logging, and hardware abstraction. Use when a user requests implementation code and provide the exact board, framework, toolchain, pins, voltage, memory, and library versions first. Bundled templates target UNO, ESP32, and RP2040; document unsupported board or vendor-framework behavior instead of guessing.

Installationen / 1h
1
GitHub Stars
26
Aktualisiert
15. Okt.
wedsamuel1230
Community

arduino-workflow-router

Route Arduino and embedded-system requests across Arduino IDE, Arduino CLI, PlatformIO, and vendor-specific tools. Use when a request combines firmware, board constraints, electronics, power, networking, calibration, enclosure, upload, debugging, OTA, or maintenance, or when the exact board or toolchain is not yet clear.

Installationen / 1h
1
GitHub Stars
26
Aktualisiert
15. Okt.