Mode d’emploi
- Copiez la commande et examinez le paquet avant de l’installer dans votre environnement agent.
- Consultez le document original pour les outils, identifiants et environnements requis.
- Décrivez les entrées et le livrable souhaité ; comparez la sortie aux sources.
npx skills add https://github.com/wedsamuel1230/embedded-engineering-skills --skill enclosure-designerAvant de commencer
- L’installation n’inclut ni abonnement au modèle, ni quota API, ni accès aux fichiers.
- Étoiles et installations reflètent l’activité, pas un test indépendant de qualité ou de sécurité.
Rendu depuis le dépôt source en conservant titres, exemples, code, tableaux, liens et images.
Enclosure Designer
Use this skill to design practical enclosures without loading a full mechanical guide up front.
Resources
assets/basic-template.scad- starting OpenSCAD templatescripts/generate_enclosure.py- enclosure generator scriptreferences/design-workflow.md- measurement, parameter, and generator
workflow
references/dimensions.md- common board and module dimensionsreferences/print-and-protection.md- wall thickness, print settings,
ventilation, and waterproofing
When to Use
Use this skill when the user asks for:
- an enclosure, case, box, or housing
- mounting holes or cutout placement
- OpenSCAD-based enclosure generation
- board fit checks for Arduino, ESP32, or Pico-class boards
- print-material or weather-resistance guidance
Workflow
- Gather the minimum physical inputs:
- board dimensions
- tallest component
- connector locations
- mounting method
- environmental constraints
- Open
references/design-workflow.mdfor the parameterization flow. - Open
references/dimensions.mdif the user does not already have exact
measurements.
- Open
references/print-and-protection.mdfor material, wall, ventilation,
or moisture guidance.
- Use
assets/basic-template.scadorscripts/generate_enclosure.pywhen the
user needs a concrete starting model.
Core Rules
- Treat user measurements as authoritative over reference dimensions.
- Add clearance deliberately for connectors, wiring, and print tolerance.
- Separate fit problems from printability problems.
- Do not promise waterproofing from geometry alone.
Verification
- The board and connectors fit with explicit clearance.
- Mounting points and cable exits are reachable.
- The selected material and wall thickness match the use environment.
- Print orientation and support strategy are named before finalizing the design.
Integration
- Pair with
battery-selectororpower-budget-calculatorif battery size
drives the enclosure volume.
- Pair with
readme-generatorwhen the enclosure should be documented for a
project repo.
Shared Output Contract
Use the shared Arduino skill contract: state assumptions, required tools and versions, implementation steps, tests/evidence by proof stage, known limitations, and recovery/security notes.
