wedsamuel1230/embedded-engineering-skills

i2c-bringup-diagnostician

Use when users need to diagnose I2C bring-up failures on Arduino or ESP32-class boards, including no devices found, wrong readings, address conflicts, scanner-detects-but-library-fails cases, pull-up problems, or board-family-specific bus quirks.

View source

How to use

  1. Copy the installation command and review the source package before installing it in your own agent environment.
  2. Check the source document for required tools, credentials and supported hosts.
  3. Describe your input and desired deliverable; review the output against the source material.
npx skills add https://github.com/wedsamuel1230/embedded-engineering-skills --skill i2c-bringup-diagnostician

Before you start

  • Installation does not include a model subscription, API allowance or permission to access your files.
  • Repository stars and installation counts describe activity, not an independent quality or security test.
Original skill document

Rendered from the source repository. Headings, examples, code, tables, links, and referenced images are preserved.

I2C Bringup Diagnostician

Use this skill when the sensor or device should be on the bus, but the I2C path is still not trustworthy.

Resources

  • references/bringup-flow.md - ordered I2C fault-isolation workflow
  • references/scanner-vs-library.md - what to do when the scanner finds the device but the library still fails
  • references/esp32-and-board-quirks.md - ESP32-family and board-specific caveats
  • ../../docs/board-support/uno-r4-family.md - Uno R4 family board notes when relevant

When to Use

Use this skill when the request includes:

  • "no I2C devices found"
  • scanner finds the address but the library cannot initialize the device
  • two I2C devices conflict or one disappears
  • ESP32 pin, bus, or second-channel confusion
  • pull-up, wire-length, or voltage-level questions
  • obviously wrong sensor values after basic detection succeeds

Workflow

  1. Establish the basic failure shape:
  • no scanner detection -> open references/bringup-flow.md
  • scanner detects but library fails -> open

references/scanner-vs-library.md

  • ESP32-family multi-bus or pin issue -> open

references/esp32-and-board-quirks.md

  1. Confirm the electrical basics before library swapping:
  • power
  • common ground
  • SDA and SCL mapping
  • pull-ups
  • logic level compatibility
  1. Only after the bus is electrically plausible, check address, device mode, and

library expectations.

  1. If the board is Uno R4 family and the failure involves board-specific I2C or

support questions, also open ../../docs/board-support/uno-r4-family.md.

Core Rules

  • Scanner success does not prove the library is using the device correctly.
  • Library failure does not prove the sensor is dead.
  • Bus voltage, pull-ups, and pin mapping must be explicit before changing code

blindly.

  • For ESP32-family boards, pin choices and multi-bus assumptions are not always

portable across variants.

Verification

  • Confirm whether the scanner sees the expected address.
  • Confirm whether a minimal register or identification read works.
  • Confirm whether the failing behavior tracks a board family, bus instance, or

library rather than the sensor alone.

  • Confirm whether the final fix survives repeated scans and actual sensor reads.

Integration

  • Pair with circuit-debugger for deeper hardware isolation.
  • Pair with datasheet-interpreter when the correct address, power, or timing

details are not known.

  • Pair with arduino-code-generator when the user needs a minimal test sketch or

a cleaned-up bus probe.

Shared Output Contract

Use the shared Arduino skill contract: state assumptions, required tools and versions, implementation steps, tests/evidence by proof stage, known limitations, and recovery/security notes.

from this repository

More skills

All skills
wedsamuel1230
Community

arduino-project-builder

Build complete Arduino and embedded projects across Arduino IDE, Arduino CLI, PlatformIO, and vendor-specific toolchains. Use when users request an application combining firmware, sensors, actuators, networking, power, or deployment rather than a code snippet. The bundled scaffold targets UNO, ESP32, and Raspberry Pi Pico; use the board profile and document limitations for other targets.

1h installs
1
GitHub stars
33
Updated
Oct 15
wedsamuel1230
Community

enclosure-designer

Use when users need a 3D-printable enclosure for an Arduino, ESP32, or RP2040 project and need help with measurements, cutouts, print settings, or environmental protection.

1h installs
1
GitHub stars
33
Updated
Oct 15
wedsamuel1230
Community

arduino-code-generator

Generate Arduino and embedded C++ snippets for sensors, actuators, buses, state machines, timing, data logging, and hardware abstraction. Use when a user requests implementation code and provide the exact board, framework, toolchain, pins, voltage, memory, and library versions first. Bundled templates target UNO, ESP32, and RP2040; document unsupported board or vendor-framework behavior instead of guessing.

1h installs
1
GitHub stars
26
Updated
Oct 15
wedsamuel1230
Community

arduino-workflow-router

Route Arduino and embedded-system requests across Arduino IDE, Arduino CLI, PlatformIO, and vendor-specific tools. Use when a request combines firmware, board constraints, electronics, power, networking, calibration, enclosure, upload, debugging, OTA, or maintenance, or when the exact board or toolchain is not yet clear.

1h installs
1
GitHub stars
26
Updated
Oct 15