Original document
GPT Image 2.5 · en
A bright beverage advertisement photograph of a chilled can of orange sparkling soda, standing at a slight
tilt on a smooth pale surface, shot on a 3:4 vertical canvas at close product distance.
COMPOSITION
The can is the largest and most central element, occupying about 55% of the frame height, its base resting
just below the lower third. A single thin orange slice curls behind the can's upper third, its circle echoing
the can's rim. One narrow arc of liquid rises from the surface behind the can and sweeps around its right
side at the can's mid-height, then falls out of frame. The arc passes BEHIND the can and never crosses the
label. The composition is built on three circles — the slice, the rim, the liquid arc — held on one vertical
axis. Empty space falls to the lower left. Nothing touches the frame edges.
SETTING AND LIGHT
Background: a seamless warm cream backdrop with a soft apricot falloff toward the lower right, no props, no
horizon. Lighting: one large soft source behind the can at the upper left, acting as a rim light that passes
through the orange slice and glows through the liquid arc; one broad white bounce card in front at low
intensity to keep the label legible. Contact shadow: one tight soft shadow directly beneath the can base.
No coloured gels, no second light, no reflections of studio equipment.
MATERIALS
Cold aluminium can with a satin brushed finish and a fine bead-blasted sheen along the rim; heavy condensation
across the cold metal, with droplets varying from fine mist to a few larger runs, all catching the back light.
Orange slice: translucent flesh with visible radial segments and a pith ring, the back light glowing through
it so the pulp reads as wet rather than as coloured glass. Liquid: thin, glossy, opaque orange with a defined
meniscus, heavy enough to hold a smooth curve, catching a bright highlight line along its top edge.
LABEL AND TEXT
The label is white with a matte paper texture, wrapped cleanly and registered straight to the can's vertical
axis. It carries exactly this text, once each: the brand word "ZEST" in a bold condensed sans on the upper
third, "ORANGE" beneath it in a smaller light sans, and "330 ML" at the bottom of the label. No other words,
numbers, marks or symbols appear anywhere in the frame. Brand text must be crisp, correctly kerned, unobstructed
and readable at thumbnail size.
CONSTRAINTS
One liquid arc only. No scattered fruit pieces, no splashes, no droplets scattered through the air. The can's
silhouette, the label's proportions and the label's registration must stay unchanged. Do not add a second can,
a glass, ice cubes, leaves or a straw. No invented logos, no badges, no awards, no "new" or "best" flashes,
no watermark. Avoid plastic-looking CGI, avoid flat airless lighting, avoid over-sharpened edges.
How to use
- Copy the complete original prompt, including any parameters.
- Replace the subject, text and composition with your own requirements.
- Use a compatible external tool; check its current access conditions and review the result.
Before you start
- Check whether a reference image is required. A compatible model label does not mean this example was generated with that model.
- Keep names, figures and visible text accurate; results can vary between model versions.
