How to use
- Copy the installation command and review the source package before installing it in your own agent environment.
- Check the source document for required tools, credentials and supported hosts.
- Describe your input and desired deliverable; review the output against the source material.
npx skills add https://github.com/ntanh1402/sdlc-skills --skill sdlc-design-story-testsBefore you start
- Installation does not include a model subscription, API allowance or permission to access your files.
- Repository stars and installation counts describe activity, not an independent quality or security test.
Rendered from the source repository. Headings, examples, code, tables, links, and referenced images are preserved.
Design the tests of one user story
This skill is a lifecycle step after the design. It takes one user story of a Feature or ChangeRequest whose design is merged, whether its Requirements are a draft or agreed, and writes the story's group wiki/<app>/tests/TS-<name>/STORY-<name>/ in the TestSuite of that Feature or ChangeRequest: cases that prove every acceptance criterion of the story. Each case is a TC-<id>-<name>.md file. Flows across stories and cases tied to no single story are written by sdlc-design-feature-tests in GENERAL/. It never writes runnable test code or touches a code repository.
Its draft prefix is tests-: the draft for STORY-coupons-apply is wiki/tests-STORY-coupons-apply. It may run at the same time as sdlc-plan-tasks, sdlc-design-feature-tests, and itself for another story of the same design.
Before you start
Read, in this skill's folder, references/read-protocol.md; each section names the other references/ files to read when it starts.
Find the wiki as the read protocol says, and check that it matches this skill. RELEASE, next to this file, holds one line such as 1.0.0:
cd "$WIKI" && $T copy check --release "<the line in RELEASE>"status | Do |
|---|---|
current | Go on |
older | Stop: "The wiki's tool is older than this skill. Run sdlc-setup-wiki to upgrade the wiki." |
newer | Stop: "The wiki was set up by a newer release. Update your installed sdlc-skills." |
edited | Stop: "The wiki's tool copy was edited by hand. Run sdlc-setup-wiki to restore it." |
Then read the schema pages schema.md, test-suite.md, test-group.md, test-case.md, user-story.md, feature.md, change-request.md, architecture-decision.md and the page of each Design type in scope, in the wiki's .wiki-llm/schema/.
| Request | Skill |
|---|---|
| No approved design yet | sdlc-design-arch |
| No such story, or the story must change | sdlc-write-stories |
| End-to-end flows across stories, or tests of a whole Feature or ChangeRequest | sdlc-design-feature-tests |
| Build tasks | sdlc-plan-tasks |
| Runnable tests, or running them | Not this skill. sdlc-build-task writes a Task's unit tests with its code |
| Load or performance tests | Not kept in the wiki; no skill designs them |
| Which tests exist, or what is uncovered | sdlc-ask-wiki |
The gates
A gate is a stop for the person's explicit approval. There are three, so the person decides what is being done (Intent), how (Design), and exactly what is saved (Change-set), each before the next cost is paid.
- Approval is an explicit yes to the gate's question. "Sounds good", silence
or "whatever you think" is not approval.
- An edit at a gate reopens that gate and every later one.
- When you cannot ask the person (a run with no one to answer), or the person
asks you to skip questions or approvals ("don't ask me, just write it"), stop before the first gate and start no draft. Return the open decisions and the gates the work still needs. Never assume approval.
- When the person rejects the design, stop. A draft worktree this run started
is discarded; a worktree an earlier run started is left as it is.
- Being asked to run this skill does not approve anything it writes.
- A refusal this file states is a refusal. Do not turn it into a question.
1. Look up: readiness and the inventory
Accept one STORY-* key; when the person names several stories, take one and say the others are separate runs. Find the story on the default branch (ls wiki/*/features/*/<key>.md wiki/*/change-requests/*/<key>.md); its folder's Feature or ChangeRequest is the target. When it is not there, look for it in the stories drafts (git branch -a --list 'wiki/stories-*' 'remotes/origin/wiki/stories-*', then git grep -l "" <branch> -- '*/<key>.md' on each): a draft that holds it is NOT_MERGED. A story in no draft is a refusal: route to sdlc-write-stories. Read the target:
| State | When | Do |
|---|---|---|
READY | A Feature Draft, ReqApproved, Approved or InDev, or a ChangeRequest Proposed, ReqApproved or Approved, whose # Architecture or # Delta is not None | Go on |
NEEDS_DESIGN | # Architecture or # Delta is None | Stop: route to sdlc-design-arch |
NOT_MERGED | The story or the target is not on the default branch, but a draft holds it (wiki/stories-<target key>, or wiki/*-<target key> for the target) | Stop and name the draft |
CLOSED | A Feature that is Released or Deprecated, or a ChangeRequest that is Implemented or Rejected | Stop: say it is closed; a change to a Released Feature goes through a ChangeRequest (sdlc-write-spec); route nowhere else |
Every state but READY is a refusal, not a question.
Then read the story, every Requirement it lists, the Architecture or Delta, the decisions, every Endpoint, Channel, Subscription, Table and External contract the story's Requirements reach, the References the story links and those about testing in references/index.md, and the existing TestSuite that verifies the target (grep -rl "<target key>" wiki/<app>/tests/*/overview.md) with its STORY-<name>/ group, if any. Run $T outdated --feature <Key> (or --change <Key>): the group, when listed, was designed from an older version of the spec. When the design itself is listed, say in the first round that the design is behind the spec and recommend sdlc-design-arch first; go on only when the person says so. Run $T validate and keep the warnings about this group (tests.story-ac, tests.story-covers): they are this skill's to fix. List:
- every acceptance criterion of the story, by its number, as a partition of
the Requirement it cites;
- for each criterion, the happy, alternate, validation and failure branches
of the contracts it reaches;
- the authentication, authorization, privacy and abuse boundaries the
criteria touch;
- retry, timeout, idempotency and duplicate handling on the story's path;
- the data the story writes or emits, and its integrity;
- the screens of the story with their access rule and their empty, loading,
error and offline states, when a frontend is in scope;
- the cases of the existing group, with the criterion numbers they name.
An unfinished run. Last, ls "$WIKI"/.worktrees/*/plan.md 2>/dev/null lists the runs that stopped part-way. When one is for this request (its folder is tests-<story key>, or its plan's title names this story), read references/write-protocol.md now and go on as its section 2 says, without asking the rounds again.
2. Questions and the Intent gate
Read references/test-design-rules.md and references/security-checklist.md now: the choices of section 3 use them.
Ask in rounds. A round is a numbered list of every question that can be answered now, each with your recommended answer. The person confirms or corrects, which is faster than composing an answer, and sees your reasoning before any work is done.
Q1 - Which categories should the cases of STORY-coupons-apply have?
(features/FEAT-coupons/STORY-coupons-apply.md, services/SVC-orders/EP-coupon-apply.md)
➡️ functional, field-validation, negative and data-validation; security-validation is not needed: no auth rule changes.
Q2 - What else in the wiki must change because of this?
➡️ Nothing: only the story's group and its cases.Which questions to ask, and how many, is your judgement. Three things are fixed:
- The format. Numbered questions, each with a recommendation. A
recommendation that rests on the wiki cites the path. A question whose answer depends on another question in the same round waits for the next round.
- At least one round, even when a brief seems complete. Its questions are
then the assumptions you would otherwise make without saying so.
- The wiki question. Ask what else in the wiki must change because of
this request, with your own answer as the recommendation.
Wait for the answers. Ask another round when the answers open new questions. Search the wiki again whenever an answer brings a system, a term or a claim about current behaviour you have not read. When nothing that changes the output is left undecided, go to the Intent gate: one approval, after the rounds.
A change another skill owns. When an answer needs a wiki change this skill does not own (such as an acceptance criterion or Requirement that cannot be tested as written), do not make it. List it under "For other skills" in the Run plan and in the summary. When your work depends on it, stop before the Intent gate and name the skill to run first.
The first round names the story, its target and the target's state, shows the inventory, and asks the person to choose the categories to write (test-case.md lists them). Each case runs as one of two types:
integration: one service and what it calls: datastores, externals,
messages;
e2e: the story's outcome across the deployed flow, through the owning
frontend when there is one.
A developer's unit tests are written with the code (sdlc-build-task). Load tests are not kept in the wiki.
The same round asks about the seams the cases test at, the exclusions, and the wiki question; the usual answer to that one is "nothing: only the story's group and its cases".
- A category the evidence requires (
references/test-design-rules.md,
"Required categories") may be declined only when the user explicitly accepts the residual risk; record that acceptance in the group's log.md.
- A step names the real table, topic, endpoint, cache key, bucket or index,
from the design file's tableName, channelName, method and path, keyPattern, bucket or indexName. When a case needs one the design does not give, stop before the Intent gate, list the missing names, and route to sdlc-design-arch. Never write the wiki key or a made-up name instead.
- An acceptance criterion that cannot be tested as written is another
skill's change: sdlc-write-stories; a Requirement or contract, sdlc-write-spec.
- A question about the criteria, the Requirements or the design that the
person cannot answer now becomes an open question of the group; the group then stays Draft.
- When the Requirements are still a draft (
Draft,Proposed), say so: the
cases may have to change when the spec does.
Intent gate. Restate the story, the inventory, the chosen categories, the seams, the exclusions, the open questions and the residual risk the person accepted. Ask for approval.
3. What goes into the design
Read references/case-format.md now. For each criterion and chosen category, partition inputs and branches with references/test-design-rules.md. "All cases" means every criterion proved, with the branches and risks of its partition, not every combination of inputs.
One suite per target: TS-<name>, the target's key without its prefix (FEAT-coupons → TS-coupons, CR-coupon-stacking → TS-coupon-stacking). When it does not exist, this run creates it. If the name is already taken by the suite of another Feature or ChangeRequest, stop and ask.
This skill writes only the group STORY-<name>/, named exactly as the story. Every case of it links the story under # Covers with the criteria it proves (— AC 1, 3) and covers at least one Requirement the story lists. Every criterion is proved by at least one case. A case that proves no criterion of this story, such as a flow across stories, belongs in GENERAL/: name it for sdlc-design-feature-tests. A case's id is the highest id in the suite + 1, across all its groups; ids of deleted cases are never reused.
A story that changed. When the story was revised after its cases were written, fix every warning validate gives about the group: correct the criterion numbers a case names (read the criteria, not only their numbers: renumbered criteria give no warning), cover each criterion no case proves, and move a case that covers none of the story's Requirements to GENERAL/, keeping its id and dropping the story link from its # Covers, with an entry in GENERAL/log.md. When the suite has no GENERAL/ group yet, create it with status: Draft, basedOn and a # Scope saying it holds cases moved from story groups, so sdlc-design-feature-tests reviews them. Show each change at the Design gate.
A group designed from an older version. Compare the spec at the version in the group's basedOn with the current one (git log -p on the overview.md). Revise the cases the change affects, add the cases it needs, and delete the cases of removed Requirements as the last rule of test-case.md says; leave the other cases as they are. Show each revised case in full at the Design gate.
Each case is a file TC-<id>-<behaviour words>.md in the group, written with references/case-format.md.
Open questions. An answer the person gave to a question under the group's # Open questions is applied to the cases it affects; the question is then removed and the answer logged in the group's log.md.
4. Run plan and the Design gate
Read references/write-protocol.md now.
Start or resume the draft tests-<story key> as write-protocol.md section 2 and section 3, "At section 4", say. The input paths are the story file and its folder's overview.md.
Prepare the test design. Build the matrix from every criterion and inventory row to its cases. The design is:
- the group with its seams, exclusions and open questions;
- each case: key, test type, category, risk, purpose, the criteria it
proves and what else it covers;
- the coverage matrix by criterion, with every uncovered row and why;
- the totals by criterion, risk, type and category;
- assumptions and residual risks.
Write the Run plan (write-protocol.md section 4). Its ## Files are the suite's overview.md when it is new, the group's overview.md and log.md, one line per case file with what it covers, and each case moved to GENERAL/ with GENERAL/log.md (and GENERAL/overview.md when new).
Design gate. Show the design in full, never only a summary, then the Run plan. Ask for approval. Approval with an uncovered criterion is not possible; approval with another uncovered in-scope row is allowed only when the user explicitly accepts that gap as residual risk.
5. Write
In the draft worktree, under wiki/<app>/tests/:
- a new suite folder
TS-<name>/withoverview.md(type: TestSuite,
# Verifies linking the Feature or ChangeRequest) when there is none;
- the group
TS-<name>/STORY-<name>/withoverview.md(type: TestGroup,
basedOn: { version: <the target's version>, at: <its versionDate> }, # Story linking the story) and log.md;
status: Draftwhile# Open questionshas items, otherwiseApproved;# Open questions, a numbered list, each question linking the
criterion's story, Requirement, Design concept or decision it is about;
- one
TC-<id>-<name>.mdper new case in the group, withtestTypeand
testCategory;
- an entry in the group's
log.md, for example
* **Test design**: Added 5 cases for STORY-coupons-apply. Written by an AI model with sdlc-design-story-tests.
Every step and validation must make sense to a tester who did not design the system and does not read the wiki. Do not write index.md or checklist.csv: draft finish writes both. Do not change another group except to add a case moved to GENERAL/.
6. Self review, finish and commit
Follow write-protocol.md section 3, "At section 6", with the self review of its section 5. In the self review, have the review sub-agent check by reading that:
- every case has its test type, category, risk, concrete preconditions,
complete steps, clean-up and links, and names the criteria it proves;
- every criterion of the story is proved by a case, and each named
criterion says what the case proves;
- each Action starts with what to do and its target, copies the values it
needs, and points at no other step or data; preconditions, steps and clean-up use real names, never a wiki key;
- each Expected result is one checkpoint per table, topic, cache entry, page
or group of API fields, - <field>: <value> lines joined with <br>, and each Validation names the fields it checks in bold;
- ids are unique in the suite;
- no case is written twice, no existing case was changed except those the
story or a newer spec version affects, and no runnable code was written;
- each step that calls an API or publishes to a channel has its request and
expected response;
- the group's
basedOnnames the current version of its target, and it is
Draft exactly when it has open questions;
- each accepted risk or gap is recorded in the group's
log.md.
Then run $T validate in the worktree: no warning about this group may be left.
Commit message: tests(<story key>): design <n> cases. In the summary, "Not done" names each gap the user accepted and each open question, and "Next" names sdlc-design-feature-tests when the target has flows across stories and no GENERAL/ group, and says the suite's checklist.csv lists its cases.
The summary
End the run with at most four lines:
Done: wiki/tests-STORY-coupons-apply, 7 files, pushed. Open the pull request.
Not done: open question on AC 3 keeps the group Draft
For other skills: AC 2 of STORY-coupons-apply names no amount (sdlc-write-stories)
Next: sdlc-design-feature-tests FEAT-coupons for the flows across stories.Leave out "Not done" and "For other skills" when they have nothing to say. Do not list what the self review fixed, and do not repeat the test design: the person approved the content at the gates, so the last message only says where it is and what comes next.
Done when
- The user chose the categories, and any declined required category has an
accepted residual risk.
- Every acceptance criterion of the story is proved by a case, and every
in-scope branch and risk is covered or the gap was accepted.
- Every case has concrete preconditions, self-contained steps with real
names, checkpoint expected results, bold validations, clean-up and links, names the criteria it proves, and has a unique id; no case is duplicated; no runnable code was written.
- The self review found nothing it could not fix, or the person accepted what
was left at the Change-set gate.
draft finishwasok, the change set was approved, anddraft commit
reported the branch.