team-setup

team-setup

Overview

team-setup is an interactive skill that guides you through setting up the team AI directives. It presents four modes, explains each option, confirms your choice, and executes the setup.

It is invoked in two ways:

• User-invoked (/team-setup) — anytime, to configure or check a project.
• Model-invoked by `team-boot` — automatically at session start when a project has no .adlc/init-options.json configuration (self-install), so an unconfigured project wires itself without the user knowing the command.

The skill is non-destructive: it never overwrites existing files or directories. If the target path already contains a configured team AI directives, it detects this and offers the "Already configured" mode instead.

When to Use

• Starting a new team from scratch and need a neutral team AI directives scaffold to fill in later.
• Your team already has a directives repo on GitHub and you want to clone it locally.
• You have a local team AI directives directory already (e.g., from a previous project) and want to wire it up.
• You're unsure whether the team AI directives is already configured and want a quick check.
• When the project isn't yet wired to a team AI directives (no .adlc/init-options.json team_ai_directives field).
• Automatically via team-boot when it detects an unconfigured project at session start (self-install).

Decline Handling (when model-invoked by team-boot)

When team-boot invokes this skill because the project is unconfigured, the user may choose not to set up team AI directives right now. Handle decline explicitly to avoid a re-prompt loop:

• If the user declines at mode selection, do not run any mode. Exit

cleanly and tell team-boot the user declined.

• Offer a persistent opt-out: "Don't ask again for this project?" On yes

(build mode only), write .adlc/init-options.json with team_ai_directives: null:

  echo '{"team_ai_directives": null}' > ".adlc/init-options.json"

This marker makes team-boot skip setup silently on every future prompt.

• In plan/read-only mode, a persistent opt-out cannot be written — the

decline is session-scoped only; tell team-boot to defer.

• Never force a mode; the setup is user-consented at every step.

Core Process

Goal

Set up a team AI directives using one of four modes.

Security: Input Validation (all modes)

Before executing any mode, validate every user-supplied value (paths, URLs, team names). These values are interpolated into shell commands; unvalidated input is a command-injection vector.

• Paths ({DEST}, {ABSOLUTE_PATH}): reject if they contain any of

`, $, ;, |, &, (, ), <, >, newline, or backslash. Resolve to an absolute path with realpath/Resolve-Path` before use.

• Team name: must match ^[A-Za-z0-9 ._-]+$. Reject anything else.
• Clone URL (Mode 1): must start with https://. Reject file://, ssh://,

and any non-https scheme unless the user explicitly confirms the risk. Cloning runs no code from the repo, but the cloned content is read by agents later — only clone repositories you trust.

If any value fails validation, report which value and why, and re-ask. Never interpolate a user value into a Python/eval source string — pass it through the environment (see Mode 2).

Fast path: if .adlc/init-options.json already contains a valid team_ai_directives path, skip to Mode 4 (Already Configured) — do not re-clone, re-point, or re-scaffold.

Modes at a Glance

Mode 1: Clone from GitHub

Full walkthrough in references/mode-clone.md.

Mode 2: Point to Existing Local Path

Full walkthrough in references/mode-local.md.

Mode 3: Scaffold New Empty team AI directives

Full walkthrough in references/mode-scaffold.md.

Mode 4: Already Configured

Full walkthrough in references/mode-configured.md.

Mode Selection Flow

1. Explore: Present the user with four options:

   How would you like to set up team-ai-directives?

   1) Clone from GitHub — Clone an existing repository
   2) Point to existing local path — Use a team AI directives you already have
   3) Scaffold new empty team AI directives — Create a fresh neutral team AI directives
   4) Already configured — Check existing configuration

1. Present: For the chosen mode, explain what will happen and show details.

1. Confirm: Ask the user to confirm before executing.

1. Write/Execute: Perform the setup for the chosen mode.

Post-Setup Configuration

After any mode completes successfully, update the project configuration:

1. Write team_ai_directives to .adlc/init-options.json
2. Verify the team AI directives is accessible by running a quick health check:

• {TEAM_AI_DIRECTIVES}/context_modules/constitution.md exists
• {TEAM_AI_DIRECTIVES}/.skills.json exists and is valid JSON

1. Check the .gitignore convention (layout allowlist — see the Gitignore Convention Check step below).
2. Inject the project-level AGENTS.md directive — full command and managed-section contract in references/post-setup-agents.md.
3. Install MCP config — merge details in references/post-setup-mcp.md.

Gitignore Convention Check

Verify .gitignore follows the ADLC allowlist — a fresh team setup must never leave a wholesale .adlc/ ignore in place (it would hide the tracked .adlc/ artifacts the team model relies on):

1. If .gitignore contains a bare .adlc/ rule, replace it (and any

.adlc/* + !.adlc/... lines that conflict) with the R7 allowlist: ignore .adlc/*, .adlc/evals/results/, .adlc/memory/*, .adlc/team-learn-report.md, .adlc/team-levelup-report.md, and graphify-out/, while re-including !.adlc/init-options.json, !.adlc/workspace.yml, !.adlc/drafts/, !.adlc/evals/, !.adlc/memory/, !.adlc/memory/evals/, and !.adlc/memory/evals/holdout.json. The canonical rule list lives in the workspace skill's scripts/bash/paths.sh (GITIGNORE_RULES_ALLOWLIST, mirrored in scripts/powershell/paths.ps1).

1. Also verify the agent-install surface rules are ignored (.agents/,

.opencode/, .claude/, .cursor/, .codex/, .gemini/, .qwen/, .devin/, .tabnine/, skills-lock.json, .skills.json, .mcp.json, .events.json, .pytest_cache/, .ruff_cache/).

1. Never remove unrelated (non-ADLC) rules; only add missing allowlist rules.
2. Tracked legacy files keep working — the allowlist gates only untracked

files, so no migration is required before the switch.

Common Rationalizations

Red Flags

• Cloning over an existing directory — Mode 1 refuses if the destination already exists to prevent overwrites.
• Pointing to a non-existent path — Mode 2 validates the path exists before proceeding.
• Scaffolding without required dirs being writable — Mode 3 creates directories with mkdir -p but will fail on permission errors; check permissions first.
• Skipping the `team_ai_directives` config write — without this field in init-options.json, agents cannot discover the team AI directives.
• Using a relative path in `init-options.json` — always resolve to an absolute path so the config is portable across working directories.
• Skipping `git init` in Mode 3 — a scaffolded team AI directives without git cannot be used by /team-levelup (branch/commit/PR flow). Mode 3 runs git init automatically; if you skip it, run git init manually before /team-levelup.
• Skipping the project-level AGENTS.md injection — without the <!-- TEAM_AI_DIRECTIVES START --> managed section in the project's AGENTS.md, agents without event support have no session-start instruction to load team context. The .adlc/init-options.json config alone is insufficient — it tells skills where the team AI directives is, but nothing tells the agent to check. (For agents with event support, the session-start hook injects the orientation regardless, but AGENTS.md remains the fallback and the source of the Team Context in Use output contract.)
• Interpolating user input into Python/shell source strings — pass paths through the environment (os.environ) instead; string interpolation of $ABSOLUTE_PATH into a Python one-liner is a command-injection vector.
• Cloning a non-`https://` URL in Mode 1 — reject file:///ssh:///other schemes; cloned content is read by agents later, so only clone trusted repos.
• Skipping the MCP config install — .mcp.json servers stay unconfigured; the project won't have access to team-declared MCP servers.
• Accepting shell metacharacters in paths or team names — validate before interpolating into mkdir/git commit/heredocs (see Input Validation).
• Treating user decline as an error — declining setup is a valid outcome; exit cleanly, tell team-boot the user declined, and offer the team_ai_directives: null opt-out marker (build mode only).
• Writing the opt-out marker in plan/read-only mode — a persistent opt-out requires a write; in plan mode the decline is session-scoped and setup defers instead.

Verification

• [ ] The team AI directives directory exists at the configured path.
• [ ] {TEAM_AI_DIRECTIVES}/context_modules/constitution.md exists.
• [ ] {TEAM_AI_DIRECTIVES}/context_modules/rules/ exists.
• [ ] {TEAM_AI_DIRECTIVES}/context_modules/personas/ exists.
• [ ] {TEAM_AI_DIRECTIVES}/context_modules/examples/ exists.
• [ ] {TEAM_AI_DIRECTIVES}/CDR.md exists.
• [ ] {TEAM_AI_DIRECTIVES}/.skills.json exists and is valid JSON.
• [ ] .adlc/init-options.json contains a team_ai_directives field with the absolute path.
• [ ] .gitignore follows the layout allowlist (no wholesale .adlc/ ignore; tracked exceptions !.adlc/init-options.json, !.adlc/workspace.yml, !.adlc/drafts/, !.adlc/evals/, !.adlc/memory/evals/holdout.json present).
• [ ] Project-level AGENTS.md exists and contains the <!-- TEAM_AI_DIRECTIVES START --> managed section with the event-hook awareness note, fallback team-boot invocation, and the Team Context in Use output contract.
• [ ] (Mode 3 only) git rev-parse --is-inside-work-tree succeeds inside {TEAM_AI_DIRECTIVES}.
• [ ] Running team-verify (Phase 0 of team-repair) passes all 7 checks.
• [ ] All user-supplied paths/URLs/team names passed Input Validation (no shell metacharacters; clone URL is https://).
• [ ] Mode 2 wrote team_ai_directives via the environment (no $ABSOLUTE_PATH interpolation into Python source).
• [ ] If {TEAM_AI_DIRECTIVES}/.mcp.json exists, any declared mcpServers were successfully merged into the project's config, and unresolved env vars were highlighted.
• [ ] (Model-invoked by team-boot) a user decline exited cleanly without running any mode; the persistent opt-out was offered, and team_ai_directives: null was written only in build mode.

Configuration

• TEAM_AI_DIRECTIVES — Path to the team AI directives (overrides .adlc/init-options.json).
• .adlc/init-options.json — Project-level config file with team_ai_directives field.
• Default fallback: team-ai-directives/ relative to project root.
• team-helpers.sh / team-helpers.ps1 — Shared scripts used for scaffolding and path resolution.

12-Factor Alignment

Factor XI (Directives as Code) — establishes a version-controlled team directives repository.