Cómo usar
- Copia el comando y revisa el paquete antes de instalarlo en tu entorno de agente.
- Consulta las herramientas, credenciales y entornos necesarios en el documento original.
- Describe las entradas y el resultado deseado; contrasta la salida con las fuentes.
npx skills add https://github.com/baratilab/mechanical-engineering-skills --skill tolerance-stackupAntes de empezar
- La instalación no incluye suscripción al modelo, cuota API ni permisos sobre tus archivos.
- Las estrellas e instalaciones reflejan actividad, no una prueba independiente de calidad o seguridad.
Contenido del repositorio de origen con títulos, ejemplos, código, tablas, enlaces e imágenes preservados.
Tolerance Stack-up
Workflow
- Define the gap. Name the gap being studied and its spec (LSL / USL). Draw the loop in text:
Housing face → bore bottom (+) → bearing (−) → spacer (−) → gear hub (−) → gap.
- Build the chain CSV (
scripts/example_chain.csvshows the format). Rules:
- Go around the loop in one direction; dimensions pointing the "positive" way are
+1, the rest-1. - Enter unequal tolerances as
plus/minus(both positive numbers). The script handles mean shift. dist:normalfor controlled processes (setcpk),uniformfor unknown processes or purchased parts with no data.- Convert GD&T to ± equivalents first: position Ø0.2 → ±0.1 radial; flatness/parallelism add as their own rows.
- Run:
python scripts/stackup.py chain.csv --lsl 0.10 --usl 0.60 --out stack- Interpret
- Worst-case OK → done; tolerances can be loosened.
- Worst-case fails but RSS / MC passes → acceptable for high volume if the processes really are in control; state the predicted ppm.
- MC reject > 2700 ppm (beyond ±3σ) → redesign: tighten the top 1–2 contributors only, or add an adjustment (shim, slotted hole).
- Recommend tolerance reallocation: tighten the contributors with the largest
pct_rssfirst; loosen the ones under 5%.
Output format
- Loop diagram (text) and the chain table
- Results table: Nominal | Worst-case min/max | RSS min/max | MC ±3σ | Reject ppm
- Contributor chart (
stack_contrib.png) and histogram (stack_hist.png) - 2–3 concrete recommendations
Limits
1-D linear stacks only. For 2-D/3-D stacks (angular errors, chains with rotation), linearize with sensitivity coefficients: enter direction as the partial derivative ∂gap/∂xᵢ instead of ±1, and say so in the report.