baratilab/mechanical-engineering-skills

tolerance-stackup

Runs 1-D tolerance stack-ups (worst-case, RSS, Monte Carlo) on a dimension chain, ranks contributors, and estimates reject rate against a gap spec.

Voir la source

Mode d’emploi

  1. Copiez la commande et examinez le paquet avant de l’installer dans votre environnement agent.
  2. Consultez le document original pour les outils, identifiants et environnements requis.
  3. Décrivez les entrées et le livrable souhaité ; comparez la sortie aux sources.
npx skills add https://github.com/baratilab/mechanical-engineering-skills --skill tolerance-stackup

Avant de commencer

  • L’installation n’inclut ni abonnement au modèle, ni quota API, ni accès aux fichiers.
  • Étoiles et installations reflètent l’activité, pas un test indépendant de qualité ou de sécurité.
Document Skill original

Rendu depuis le dépôt source en conservant titres, exemples, code, tableaux, liens et images.

Tolerance Stack-up

Workflow

  1. Define the gap. Name the gap being studied and its spec (LSL / USL). Draw the loop in text:

Housing face → bore bottom (+) → bearing (−) → spacer (−) → gear hub (−) → gap.

  1. Build the chain CSV (scripts/example_chain.csv shows the format). Rules:
  • Go around the loop in one direction; dimensions pointing the "positive" way are +1, the rest -1.
  • Enter unequal tolerances as plus/minus (both positive numbers). The script handles mean shift.
  • dist: normal for controlled processes (set cpk), uniform for unknown processes or purchased parts with no data.
  • Convert GD&T to ± equivalents first: position Ø0.2 → ±0.1 radial; flatness/parallelism add as their own rows.
  1. Run:
bash
   python scripts/stackup.py chain.csv --lsl 0.10 --usl 0.60 --out stack
  1. Interpret
  • Worst-case OK → done; tolerances can be loosened.
  • Worst-case fails but RSS / MC passes → acceptable for high volume if the processes really are in control; state the predicted ppm.
  • MC reject > 2700 ppm (beyond ±3σ) → redesign: tighten the top 1–2 contributors only, or add an adjustment (shim, slotted hole).
  1. Recommend tolerance reallocation: tighten the contributors with the largest pct_rss first; loosen the ones under 5%.

Output format

  • Loop diagram (text) and the chain table
  • Results table: Nominal | Worst-case min/max | RSS min/max | MC ±3σ | Reject ppm
  • Contributor chart (stack_contrib.png) and histogram (stack_hist.png)
  • 2–3 concrete recommendations

Limits

1-D linear stacks only. For 2-D/3-D stacks (angular errors, chains with rotation), linearize with sensitivity coefficients: enter direction as the partial derivative ∂gap/∂xᵢ instead of ±1, and say so in the report.

du même dépôt

Autres Skills

Tous les Skills