baratilab/mechanical-engineering-skills

tolerance-stackup

Runs 1-D tolerance stack-ups (worst-case, RSS, Monte Carlo) on a dimension chain, ranks contributors, and estimates reject rate against a gap spec.

소스 보기

사용 방법

  1. 설치 명령을 복사하고 자신의 에이전트 환경에 설치하기 전에 소스 패키지를 확인하세요.
  2. 필요한 도구, 인증 정보, 지원 환경은 원본 문서에서 확인하세요.
  3. 입력과 원하는 산출물을 설명하고 출처와 결과를 대조하세요.
npx skills add https://github.com/baratilab/mechanical-engineering-skills --skill tolerance-stackup

시작 전 확인

  • 설치에는 모델 구독, API 한도, 파일 접근 권한이 포함되지 않습니다.
  • 별점 수와 설치 수는 활동 지표이며 독립적인 품질·보안 검증이 아닙니다.
원본 Skill 문서

원본 저장소의 제목, 예시, 코드, 표, 링크, 이미지를 유지해 표시합니다.

Tolerance Stack-up

Workflow

  1. Define the gap. Name the gap being studied and its spec (LSL / USL). Draw the loop in text:

Housing face → bore bottom (+) → bearing (−) → spacer (−) → gear hub (−) → gap.

  1. Build the chain CSV (scripts/example_chain.csv shows the format). Rules:
  • Go around the loop in one direction; dimensions pointing the "positive" way are +1, the rest -1.
  • Enter unequal tolerances as plus/minus (both positive numbers). The script handles mean shift.
  • dist: normal for controlled processes (set cpk), uniform for unknown processes or purchased parts with no data.
  • Convert GD&T to ± equivalents first: position Ø0.2 → ±0.1 radial; flatness/parallelism add as their own rows.
  1. Run:
bash
   python scripts/stackup.py chain.csv --lsl 0.10 --usl 0.60 --out stack
  1. Interpret
  • Worst-case OK → done; tolerances can be loosened.
  • Worst-case fails but RSS / MC passes → acceptable for high volume if the processes really are in control; state the predicted ppm.
  • MC reject > 2700 ppm (beyond ±3σ) → redesign: tighten the top 1–2 contributors only, or add an adjustment (shim, slotted hole).
  1. Recommend tolerance reallocation: tighten the contributors with the largest pct_rss first; loosen the ones under 5%.

Output format

  • Loop diagram (text) and the chain table
  • Results table: Nominal | Worst-case min/max | RSS min/max | MC ±3σ | Reject ppm
  • Contributor chart (stack_contrib.png) and histogram (stack_hist.png)
  • 2–3 concrete recommendations

Limits

1-D linear stacks only. For 2-D/3-D stacks (angular errors, chains with rotation), linearize with sensitivity coefficients: enter direction as the partial derivative ∂gap/∂xᵢ instead of ±1, and say so in the report.

같은 저장소의 Skills

더 많은 Skills

모든 Skills