mohitmishra786/low-level-dev-skills

adc-dac-baremetal

Bare-metal ADC and DAC skill.

Ver código fuente

Cómo usar

  1. Copia el comando y revisa el paquete antes de instalarlo en tu entorno de agente.
  2. Consulta las herramientas, credenciales y entornos necesarios en el documento original.
  3. Describe las entradas y el resultado deseado; contrasta la salida con las fuentes.
npx skills add https://github.com/mohitmishra786/low-level-dev-skills --skill adc-dac-baremetal

Antes de empezar

  • La instalación no incluye suscripción al modelo, cuota API ni permisos sobre tus archivos.
  • Las estrellas e instalaciones reflejan actividad, no una prueba independiente de calidad o seguridad.
Documento original del Skill

Contenido del repositorio de origen con títulos, ejemplos, código, tablas, enlaces e imágenes preservados.

ADC and DAC (Bare-Metal)

Purpose

Configure ADC and DAC peripherals: channel selection, sampling times, calibration sequences, DMA circular buffers, and DAC static/dynamic output.

When to Use

  • Reading analog sensors (temperature, voltage)
  • Audio or control voltage output via DAC
  • Continuous sampling with DMA
  • Post-reset ADC calibration on STM32

Workflow

1. STM32 ADC single conversion

c
/* Enable ADC1 and GPIOA clock; PA0 analog mode */
ADC1->CR2 |= ADC_CR2_ADON;
for (volatile int i = 0; i < 10000; i++);  /* stabilization — RM value */

ADC1->SMPR2 |= ADC_SMPR2_SMP0_2;  /* 84 cycles sample time ch0 */
ADC1->SQR3   = 0;                 /* channel 0, 1 conversion */
ADC1->CR2   |= ADC_CR2_SWSTART;

while (!(ADC1->SR & ADC_SR_EOC))
    ;
uint16_t sample = ADC1->DR;

Run ADC_Calibration() / ADC_CR2_RSTCAL/CAL per RM on F1/F4 families.

2. DMA circular ADC

c
/* ADC1 → DMA2 Stream0, circular mode into buffer[64] */
/* Configure DMA: periph-to-mem, halfword, increment mem, circular */
ADC1->CR2 |= ADC_CR2_DMA | ADC_CR2_CONT;
DMA2_Stream0->CR |= DMA_SxCR_EN;

Half-transfer / transfer-complete IRQs for double buffering.

3. DAC output (STM32)

c
RCC->APB1ENR |= RCC_APB1ENR_DACEN;
DAC->CR |= DAC_CR_EN1;
DAC->DHR12R1 = 2048;  /* mid-scale 3.3V reference */

4. Agent usage

/adc-dac-baremetal Set up ADC1 channel 0 with DMA circular buffer

Common Problems

SymptomCauseFix
Noisy readingsShort sample timeIncrease SMP bits
Stuck EOCClock not enabledRCC ADC enable
Wrong voltageVref not 3.3VMeasure VDDA; calibrate
DMA corruptBuffer alignmentUse uint16_t aligned buffer

Related Skills

  • skills/baremetal/dma-baremetal — ADC DMA streams
  • skills/baremetal/timers-pwm-baremetal — ADC external trigger
  • skills/baremetal/gpio-baremetal — analog pin mode

Relacionados por tarea

del mismo repositorio

Más Skills

Todos los Skills
mohitmishra786
Comunidad

low-power-embedded

Low-power embedded skill for sleep modes and energy optimization. Use when configuring MCU sleep/stop/standby, peripheral clock gating, wake-up sources, or measuring firmware current draw. Activates on queries about WFI, STOP mode, STM32 PWR, nRF sleep, wake-up EXTI, or reducing embedded power consumption.

Instalaciones / 1h
1
GitHub Stars
296
Actualizado
20 nov
mohitmishra786
Comunidad

core-dumps

Core dump analysis skill for production crash triage. Use when loading core files in GDB or LLDB, enabling core dump generation on Linux/macOS, mapping symbols with debuginfo or debuginfod, or extracting backtraces from crashes without re-running the program. Activates on queries about core files, ulimit, coredumpctl, debuginfod, crash triage, or analyzing segfaults from production binaries.

Instalaciones / 1h
2
GitHub Stars
267
Actualizado
27 jun
mohitmishra786
Comunidad

custom-allocators

Custom allocator skill for memory allocation strategies. Use when implementing pool/slab/arena allocators, tuning jemalloc/mimalloc, writing Rust GlobalAlloc, or benchmarking allocator performance. Activates on queries about jemalloc, mimalloc, tcmalloc, arena allocator, GlobalAlloc, or fragmentation.

Instalaciones / 1h
2
GitHub Stars
267
Actualizado
27 jun
mohitmishra786
Comunidad

ebpf

eBPF skill for Linux observability and networking. Use when writing eBPF programs with libbpf or bpftrace, attaching kprobes/tracepoints/XDP hooks, debugging verifier errors, working with eBPF maps, or achieving CO-RE portability across kernel versions. Activates on queries about eBPF, bpftool, bpftrace, XDP programs, libbpf, verifier errors, eBPF maps, or kernel tracing with BPF.

Instalaciones / 1h
2
GitHub Stars
267
Actualizado
27 jun