Come usare
- Copia il comando e controlla il pacchetto prima di installarlo nel tuo ambiente agente.
- Controlla strumenti, credenziali e ambienti richiesti nel documento originale.
- Descrivi input e risultato desiderato; confronta l’output con le fonti.
npx skills add https://github.com/mohitmishra786/low-level-dev-skills --skill adc-dac-baremetalPrima di iniziare
- L’installazione non include abbonamenti, quote API o accesso ai file.
- Stelle e installazioni indicano attività, non un test indipendente di qualità o sicurezza.
Documento Skill originale
Contenuto dal repository con titoli, esempi, codice, tabelle, link e immagini preservati.
ADC and DAC (Bare-Metal)
Purpose
Configure ADC and DAC peripherals: channel selection, sampling times, calibration sequences, DMA circular buffers, and DAC static/dynamic output.
When to Use
- Reading analog sensors (temperature, voltage)
- Audio or control voltage output via DAC
- Continuous sampling with DMA
- Post-reset ADC calibration on STM32
Workflow
1. STM32 ADC single conversion
c
/* Enable ADC1 and GPIOA clock; PA0 analog mode */
ADC1->CR2 |= ADC_CR2_ADON;
for (volatile int i = 0; i < 10000; i++); /* stabilization — RM value */
ADC1->SMPR2 |= ADC_SMPR2_SMP0_2; /* 84 cycles sample time ch0 */
ADC1->SQR3 = 0; /* channel 0, 1 conversion */
ADC1->CR2 |= ADC_CR2_SWSTART;
while (!(ADC1->SR & ADC_SR_EOC))
;
uint16_t sample = ADC1->DR;Run ADC_Calibration() / ADC_CR2_RSTCAL/CAL per RM on F1/F4 families.
2. DMA circular ADC
c
/* ADC1 → DMA2 Stream0, circular mode into buffer[64] */
/* Configure DMA: periph-to-mem, halfword, increment mem, circular */
ADC1->CR2 |= ADC_CR2_DMA | ADC_CR2_CONT;
DMA2_Stream0->CR |= DMA_SxCR_EN;Half-transfer / transfer-complete IRQs for double buffering.
3. DAC output (STM32)
c
RCC->APB1ENR |= RCC_APB1ENR_DACEN;
DAC->CR |= DAC_CR_EN1;
DAC->DHR12R1 = 2048; /* mid-scale 3.3V reference */4. Agent usage
/adc-dac-baremetal Set up ADC1 channel 0 with DMA circular bufferCommon Problems
| Symptom | Cause | Fix |
|---|---|---|
| Noisy readings | Short sample time | Increase SMP bits |
| Stuck EOC | Clock not enabled | RCC ADC enable |
| Wrong voltage | Vref not 3.3V | Measure VDDA; calibrate |
| DMA corrupt | Buffer alignment | Use uint16_t aligned buffer |
Related Skills
skills/baremetal/dma-baremetal— ADC DMA streamsskills/baremetal/timers-pwm-baremetal— ADC external triggerskills/baremetal/gpio-baremetal— analog pin mode
